Sliding tarpaulin platform body for 3A truck

• Product details

  TYPE DESIGNATION

  PLATFORM BODY – UP TO 14 T TOTAL WEIGHT

  WEIGHTS

  Body weight: approx. 1.2 t

  DIMENSIONS

  Internal platform length: approx. 6,100 mm
  Internal platform width: approx. 2,480 mm
  Total width: 2,550 mm

  Load space internal height: approx. 2,000 – 2,300 mm

  Load space internal height, body height, loading height, total height etc. can only be checked
  and announced upon specification of the exact truck data

  FRAME

  Clamped/bolted steel construction,
  with attached cross members – design height approx. 210 mm
  11 pairs of recessed lashing points according to UVV

  FLOOR

  Resin-coated birch plywood floor, 30 mm, flush with external frame
  (floor load capacity up to 2.5 t stacker axle load)

  PAINTWORK

  Blasted with steel granulate, treated with zinc dust primer and spray painted
  2-component acrylic paints for commercial vehicles (standard RAL or truck colour)

  hot-dip galvanised – unpainted = subframe and cross members

  Plastic and hot-dip galvanised parts unpainted,
  powder-coated attachments black

  Reflective contour marking strips across entire length of sides (continuing onto truck cab) and all-round contour marking at rear
  (white on sides and red at rear by default), according to ECE 48

  ACCESSORIES

  Rear markings as per ECE standards

  ATTACHMENTS

  Rear crash guard
  Side wall stop buffer
  Bracket for wheel chock(s)

  SIDE WALLS

  Fixed aluminium hollow profile front wall, 1,700 mm, with 2 full-height centre supports
  Front wall reinforced inside with 3/5 mm aluminium chequer plate, approx. 650 mm high

  2-part aluminium hollow profile side walls, 600/25 mm,
  with rubber seal and bracket recess for tarpaulin overhang (360 mm),
  with French tarpaulin brackets, spacing approx. 400 mm (not customs-compliant),
  foldable with latch-type tension locks 681-S1
  Foldable aluminium hollow profile rear wall, 600 mm high, with rubber seal and bracket recess, customs-compliant with tarpaulin brackets,
  with latch-type tension locks 681-S1
  Folding step

  POSTS/COVER/TARPAULIN

  2 front corner posts, bolted to front, 1,700 mm high
  2 foldable centre posts, 1,800 mm high, split
  2 rear corner posts, bolted to sides, 1,700 mm high
  3 rows of softwood slot-in slats, 100/27 mm, in pockets, spacing: 400/2 x 200 mm

  Fixed pole roof with 6 rows of longitudinal pipes, 60 mm, and transverse bows for posts.

  Tarpaulin made from high-strength Trevira fabric with translucent roof, all-round rubber tensioner, tarpaulin manufacturer as per factory specifications, tarpaulin colour according to availability