Platform body for 3A truck

• Product details

  TYPE DESIGNATION

  SLIDING TARPAULIN PLATFORM BODY ON 2-AXLE TRUCK

  WEIGHTS

  Body weight: approx. 1.7 t

  DIMENSIONS

  Internal platform length: approx. 6,100 mm
  Internal platform width: approx. 2,480 mm
  Total width: 2,550 mm

  Total height, unladen, adapted to approx. 4,000 mm
  Internal width between guide rails: approx. 2,430 mm
  Portal loading width: approx. 2,480 mm

  Load space internal height, body height, loading height, total height etc. can only be checked
  and announced upon specification of the exact truck data

  FRAME

  Welded steel frame construction with attached/inserted cross members
  11 pairs of recessed 2.5 t lashing points according to UVV

  FLOOR

  Spruce subfloor, 30 mm, lengthwise
  Galvanised steel omega profiles in subfloor
  Secondary floor made from resin-coated birch plywood, 9 mm, flush with external frame
  (floor load capacity: 5,460 kg stacker axle load acc. to CSC)

  SIDE WALLS/SLIDING TARPAULIN

  Fixed aluminium hollow profile front wall, 2,400 mm, with 2 centre supports,
  2 lashing rings inside for load securing
  Closed with tarpaulin over front wall, in same colour as side tarpaulin
  Front wall reinforced inside with 3/5 mm aluminium chequer plate, approx. 650 mm high

  Plastic sliding tarpaulins on both sides with load certification according to Code XL; welded horizontal and vertical strap reinforcements incl. turnbuckles as well as front and rear bolt locks, openable on all 4 corners, with ratchet tensioner at front and rear,
  tarpaulin manufacturer as per factory specifications, tarpaulin colour according to availability
  Plastic tarpaulin roof, translucent = white

  Bolted portal at rear with aluminium corner posts, upper crossbeam with forward-sliding Edscha cover, incl. fully opening double door in tubular design covering entire load space height, each leaf equipped with 2 internal espagnolettes

  POSTS/COVER

  2 fixed aluminium corner posts at front, bolted, protruding approx. 95 mm from sides
  1 centre post on left in direction of travel, movable across entire length
  1 centre post on right in direction of travel, movable across entire length
  4 rows of slat pockets, 1st pocket row at bottom 460 mm,
  spacing approx. 160/450/450 mm, with 4 rows of aluminium slats 100/25 mm

  Edscha sliding cover frame with plastic brackets, forward-sliding with automatic elevation, limited backward movement (opened from above) = pushed together in loading area, with vertical and horizontal guide rollers = smooth operation
  Aluminium guide rail profile on both sides for sliding tarpaulins and posts,
  design height 125 mm, or approx. 140 mm with plastic sealing lip bent upwards

  PAINTWORK

  Blasted with steel granulate, treated with zinc dust primer and spray painted
  2-component acrylic paints for commercial vehicles (standard RAL or truck colour)

  Plastic and hot-dip galvanised parts unpainted,
  powder-coated attachments/installation parts black

  Reflective contour marking strips across entire length of sides (continuing onto truck cab) and all-round contour marking at rear
  (white on sides and red at rear by default), according to ECE 48

  ACCESSORIES

  Rear markings as per ECE standards

  ATTACHMENTS

  Rear crash guard with portal post protection and lower post reinforcement
  Bracket for wheel chock(s)
  1 x retractable step unit at rear right
  Plastic mudguards with spray protection as per regulations
  Aluminium combination bumper strip, bolted on both sides, for tarpaulin mounting
  and slat fixation
  Side impact protection made from aluminium profiles as per regulations, coated black
  1 plastic toolbox , lockable, unpainted