FAST-SWAP TIPPER BODY WITH SEMITRAILER EQUIPMENT
WITH FIXED SUBFRAME
Tipper body and STT equipment
The tipper subframe, which is fixed to the chassis as per body guidelines, is tapered at the rear for semitrailer operation and
the pat. outrigger welded in a recessed position.
The tilt cylinders with deactivation and arrester cable are affixed to the tipper body using towing pins.
Raising with suitable lifting and lowering device of truck rear axle air suspension, stacker, crane or similar means, or using
pneumatic lifting device available at additional cost.
Setting down on tubular support legs – attachable to 1 set of support leg pockets – with feet on firm, level surface.
Incl. HP hoses and dry screw couplings for tipper body or tipping semitrailer
The process is facilitated by positioners, guides and stops.
1 fifth-wheel coupling, 2″, incl. level mounting plate with interchangeable subframe incl. guide rails, positioners and stops
E asily changeable thanks to towing pin fixation
R aising with crane, stacker or semitrailer support jacks (or with aforementioned air suspension with support legs and pockets – at additional cost)
Contact your preferred office and we will do our best to solve all your challengesGet intouch