Centre-axle timber/stanchion trailer – without platform

• Product details

  TYPE DESIGNATION

  CENTRE-AXLE STANCHION TRAILER – WITHOUT PLATFORM

  WEIGHTS

  Gross weight (perm.): 18 t
  Gross weight (techn.): 19 t with 1 t drawbar load
  Tare weight: approx. 3.1 t

  DIMENSIONS

  Frame length: approx. 5,000 mm
  Total width: 2,550 mm
  Unladen loading height up to upper stanchion edge: approx. 1,320 mm
  (trailer stanchions not in wheel area)

  FRAME

  Naxtra centre-axle welded steel frame construction
  Drawbar with height-adjustable (- approx. 110 mm) screw-on drawbar eye, 50 mm,
  for centre-axle heavy-duty coupling, for 0 mm truck superstructure (not low-coupled)
  and unladen coupling height approx. 800 – max. 1,000 mm
  gripper deflector plates approx. 200 mm long

  CHASSIS

  Air suspension without lifting and lowering device,
  bellow diameter 360 mm

  BRAKE SYSTEM

  Brake system according to EC Directive 71/320 or ECE R13
  Two-line brake
  EBS – electronic brake system
  Knorr 2S2M = 2nd axle sensed
  RSS – stability program
  Spring-loaded parking brake on 2nd axle
  Steel air tank
  Brake valves etc. mounted with protection or cover

  FLOOR

  Cover between the frame longitudinal beams, 12 mm resin-coated panels

  STANCHION BODY

  2 ExTe trailer stanchions 144-S with 2-part stanchions incl. bolt fastening,
  load height: max. 2,800 mm, load capacity of stanchions: max. 7 t per pair (minimal
  stanchion inclination inwards), mounted/movable by means of welded clamp fastening
  1 lashing point for belt hooks per stanchion on left and right

  ELECTRICAL EQUIPMENT

  24 V lighting system according to EC Directive 76/756/EEC
  2 seven-chamber tail lights in underride protection
  LED side marker lights
  2 clearance lamps
  2 contour lights on underride protection
  Fixed cable(s) with 2 x 7-pin or 1 x 15-pin connector

  PAINTWORK

  Blasted with steel granulate, treated with zinc dust primer and spray painted
  2-component acrylic paints for commercial vehicles (standard RAL or truck colour)

  Stanchions in original orange signal colour
  Plastic and hot-dip galvanised parts unpainted,
  powder-coated attachments/installation parts black

  Reflective contour marking strips across entire length of sides and on the rear (white on sides and red at rear by default), according to ECE 48

  ACCESSORIES

  Rear markings as per ECE standards

  ATTACHMENTS

  Wheel chock(s) as per regulations
  4 single wheel plastic mudguards with spray protection as per regulations (non-removable)
  Aluminium underride protection, coated white
  “Schwarzmüller” rubber apron on the underride protection, over the entire width
  Side impact protection made from aluminium profiles as per regulations, coated black

  AXLES

  Low-maintenance air-sprung axles, each with 9 t axle load
  S-cam brake 420/180 mm, autom. brake linkage adjuster
  Reinforced axle beam (off-road version)

  Tyres :
  4 x 385/65 R 22.5 160J, manufacturer as per factory specifications
  4 steel wheel rims 11.75 x 22.5, 10-hole, without rim offset, silver

  SUPPORT FIXTURES

  1 mechan. support jack with hand crank at front