Centre-axle low-loader trailer with straight platform

• Product details

  TYPE DESIGNATION

  2-AXLE LOW LOADER TRAILER

  WEIGHTS

  Gross weight (techn.): 20 t
  Payload: approx. 15.3 t
  Gross weight (perm.): 18 t
  Tare weight: approx. 4. 6 t

  DIMENSIONS

  Approx. 2,100 mm raised platform at front incl. frame offset, tapered corners
  Approx. 4,500 mm = drop-deck platform – flat load surface
  Approx. 1,000 mm = rear access slope
  Total width: 2,550 mm
  Loading height, laden: approx. 870 mm

  FRAME

  Welded steel construction with flat front frame offset or body offset
  and drive-on taper at rear
  4 pairs of lashing points in external frame
  2 pairs of recessed foldable 5 t lashing rings in floor (10 t techn. tensile strength)

  CHASSIS

  Reinforced, maintenance-free parabolic springs

  Low-loader axles, each with 11 t axle load
  S-cam brake 300/200 mm, autom. brake linkage adjuster

  Tyres :
  8 x 2 4 5/7 0 R 17.5 14 3 J, manufacturer as per factory specifications
  8 steel wheel rims 6.75 x 17.5, 10-hole, with rim offset, silver

  BRAKE SYSTEM

  Brake system according to EC Directive 71/320 or E CE R13
  Two-line brake
  EBS – electronic brake system
  Wabco 4S3M = both axles sensed
  Spring-loaded parking brake on 2nd axle
  Steel air tank

  FLOOR

  Softwood floor 50 mm, waterproofed, protruding approx. 5 – 10 mm beyond frame
  profiles or beyond steel stud plate cover over rear wheels

  RAMPS

  2 foldable, 1-part loading ramps, approx. 2,800/710 mm, with hardwood flooring
  Ramp width manually adjustable by approx. 550 mm, with rod,
  (min. spacing approx. 295 mm up to max. total width of 2,815 mm)
  lockable in driving position using chains with turnbuckle
  2 autom. folding supports at rear
  Lifting aid with coil spring

  ELECTRICAL EQUIPMENT

  24 V lighting system according to EC Directive 76/756/E WG
  2 five-chamber tail lights on ramps
  LED side marker lights
  2 clearance lamps
  2 contour lights
  Fixed cable(s) with 2 x 7-pin or 1 x 15-pin connector

  PAINTWORK

  Blasted with steel granulate, treated with zinc dust primer and spray painted
  2-component acrylic paints for commercial vehicles (standard RAL or truck colour)

  Plastic and hot-dip galvanised parts (extensions etc.) unpainted,
  powder-coated attachments/installation parts and drawbar black

  Reflective contour marking strips across entire length of sides and on the rear (white on sides and red at rear by default), according to ECE 48

  ACCESSORIES

  Rear markings as per ECE standards

  ATTACHMENTS

  Wheel chock(s) as per regulations
  Plastic mudguards or splashguards with spray protection as per regulations
  Side impact protection
  Spare wheel well for 1 spare wheel
  2 open accessory compartments in raised platform at front
  Externally welded square ribs on ramps and rear access slope
  Centre of gravity marking

  DRAWGEAR

  Fixed drawbar, 1,800 mm long, 40 mm drawbar eye, 5° angle,
  with silent bushing
  truck superstructure up to 500 mm
  Truck coupling height, unladen: approx. 850 – 900 mm