Aluminium tank body for 5A truck with individual drainage and electr. dipsticks

• Product details

  TYPE DESIGNATION

  ALUMINIUM TANK BODY ON 5-AXLE TRUCK IN BOX BODY DESIGN

  Side cabinet, with electronic dipstick measuring system, for mineral oil transport

  GENERAL

  Vehicle designation acc. to 9.1.1.2 ADR: FL
  Tank code acc. to 4.3.4.1 ADR: LGBF
  Special provisions acc. to 6.8.4 ADR: TE 7, TE 19
  For transporting petrol UN 1203,
  diesel fuel and EL heating oil UN 1202

  HOSE STORAGE

  Storage facility for two 4″ outlet hoses and two 3″ gas return hoses

  EQUIPMENT

  1 external cable drum with automatic winding mechanism
  2 x 6 kg fire extinguishers
  2 warning triangles
  1 hazard warning flasher with work light and batteries
  1 plastic collecting vessel
  1 dustpan, galvanised
  1 hand brush
  1 PVC box with oil binding agent
  1 high-visibility vest
  1 pair of protective goggles
  1 pair of gloves
  1 eyewash bottle
  1 drain cover

  LABELLING

  8 number plates, 3 on either side and
  1 each at front and back
  3 removable hazardous substance labels (flame symbol)
  3 removable hazardous substance labels (environmentally hazardous substances)
  Rear markings as per ECE standards

  ELECTRICAL EQUIPMENT

  Original truck electrical equipment retained
  Installation of side marker lights fitted to truck chassis
  1 ex-proof cabinet light on left and right
  2 contour lights on underride protection

  PAINTWORK

  Priming and spray painting with 2-component acrylic paint for commercial vehicles (standard RAL or truck colour)
  Subframe with attachments and transport containers unicoloured as per colour specifications
  Plastic components unpainted
  Powder-coated attachments/installation parts black

  Reflective contour marking strips across entire length of sides (continuing onto truck cab) and all-round contour marking at rear (white on sides and red at rear by default), according to ECE 48

  ACCEPTANCE

  Acceptance as per ADR
  Tank documentation
  Type approval

  CONTAINER FITTINGS – PER CHAMBER

  1 dome cover, recessed
  1 electro-optical top sensor
  2 tip valves for ventilation
  2 fan pots with flame arresters
  1 BARTEC dipstick
  1 pneum. bottom valve

  SUBFRAME, MOUNTING AND ATTACHMENTS

  Stainless steel subframe bolted to chassis frame
  Elastic container mounting
  Aluminium discharge box on right in direction of travel with parallel sliding door
  Aluminium bottom-loading box
  Special accessories boxes
  Aluminium box for fire extinguisher
  Plastic mudguards with mud flaps and spray-suppression system

  TRANSPORT CONTAINER

  Aluminium alloy and wall thickness as per ADR regulations
  Box – double-wedge format
  Gross capacity: approx. 38,000 l
  3 chambers, chamber division as per customer specification
  Baffles, if techn. required
  Earthing pin on left and right

  PIPING/SINGLE OUTLETS

  Filling on left in direction of travel
  Output on left or right
  Aluminium single outlet lines DN 100 on
  right in direction of travel with connection couplings
  One API filling port per chamber on left in direction of travel
  Adapter for output via API couplings

  Gas return line connected to fan pots
  Safety pressure relief/vacuum valve

  DIPSTICK MEASURING SYSTEM

  Base unit for dipstick system
  (Bartec, Sening, DeziData)
  Display on right and left in direction of travel
  Tilt sensor
  DIN A5 label printer
  Density measurement
  Product detection
  Vehicle location

  OVERSPILL PROTECTION

  Dual overspill protection for simultaneous output of two products