Aluminium 3-axle large-scale tipper semitrailer

• Product details

  TYPE DESIGNATION

  ALUMINIUM 3-AXLE LAGE-SCALE TIPPER SEMITRAILER
  for easily sliding bulk goods, pallet and grain transport

  DIMENSIONS

  Internal length: approx. 10,000, 10,500, 11,500, 13,300 mm
  Internal width: approx. 2,470mm
  Internal height: approx. 2,000, 2,200, 2,300, 2,500 mm
  Cargo volume: approx. 49, 52, 54, 57, 60, 62, 65, 76, 82 m³
  Max. total width: 2,550 mm
  Max. total height (unloaded): approx. 3,470 – 3,970 mm
  Fifth wheel height: approx. 1,200 mm
  Loading height (unloaded): approx. 1,470 mm

  FRAME

  Welded steel frame design with rear tipping shaft
  Replaceable 2” kingpin

  TIPPER BODY

  Aluminium corner body in pallet design = smooth inside and outside, vertical front and rear walls, discharge chute not included
  Reinforced front wall without excavator protection
  Side and rear walls made from hollow profiles with upper frame on top
  Crosspiece at back = pivoting door lock rod including actuation rod
  Uniform fixed support across front wall and rear crosspiece
  End-to-end floor panel with narrow cross ribs
  (warping after welding may provoke minor corrugation)
  Completely seal-welded inside of side walls
  Combination rear wall = centrally divided double door with 1 external espagnolette and door latch each plus extra double hinged frame including automatic locking mechanism and shutoff of sliding discharge gate
  1 grain feeder (approx. 400/400 mm) per door leaf with side-mounted dosing lever and water guard plate

  PAINTWORK

  Primer and top coats spray painted with 2-component acrylic varnishes for commercial vehicles
  Black plastic parts not painted
  Powder-coated black attachments/mountings
  Hot-dip galvanised parts not painted

  ATTACHMENTS

  Aluminium platform with aluminium safety grating, guard rail and ladder included
  Aluminium side impact protection profiles
  Spare wheel bracket not included
  1 aluminium ladder, bracket included
  Labelling, operating and safety instructions in German
  Licence plate frame
  Rear marking pursuant to ECE
  CE mark of conformity

  WEIGHTS

  Gross weight (techn.): 39 t
  Axle assembly load (techn.): 27 t
  Fifth-wheel load (techn.): 12 t
  Tare weight: approx. 5,7 t or heavier (+/- DIN tolerance)

  ACCESSORIES

  1 level gauge (to check horizontal position)
  3 pairs of plastic single wheel mudguards with spray protection as per regulations
  Unpainted folding trapezoidal aluminium underride protection, aluminium latch included
  2 wheel chock and holders as per regulations
  Removable grain feeder discharge funnel, dust bag not included, mounted on chassis
  Noise dampers = rubber pads

  LANDING GEAR

  Aluminium support jack, 2 x 12 t, mechanically operated on the right, including pivot foot, further options to choose from

  AXLES

  SAF Intradisc axles with disc brakes
  Axle load: 9 t/axle, on-road models
  Wheelbase: 1,310 + 1,310 mm
  Automatically lifting front axle

  WHEELS

  6x 385/65 R 22.5, 160K tyre
  6x 11.75 x 22.5 steel or aluminium rim
  Spare tyre not included

  BRAKES

  Brake system pursuant to EC Directives 71/320 and/or ECE R13
  Two-line compressed air brake system
  Wabco brake system
  EBS system plus RSS stability programme
  Spring-loaded parking brake on 2 axles
  Steel or aluminium air tank
  2 separate yellow/red brake/air line couplings
  Electronic air suspension with automatic lowering device operated by inductive switch and lowering lock operated by rotary switch on semitrailer
  Hose or cable connections to semitrailer tractor not included

  HYDRAULICS

  1-tube system with screw coupling
  Hydraulic hose connection to semitrailer truck not included
  High-pressure front cylinder for backward tipping, tipping angle: approx. 45 degrees

  TARPAULIN

  Plastic roller tarpaulin incl. aluminium slat and hand crank on right in travelling direction
  Horizontal tarpaulin bracket rope fastening, 3 stop brackets plus holder for rolled-up tarpaulin; tarpaulin hook at front and back with zig-zag tie fastening
  3 central removable and swivelling rube crosspieces = also serve as tarpaulin support, approx. 100 mm inclination
  Tarpaulin attached on left in travelling direction by means of 4 tension belts (rubber pads included) and turnbuckles on tipper body’s underside

  LIGHTING/ELECTRICAL EQUIPMENT

  24 V lighting system pursuant to EC Directive 76/756/EEC
  2 five-chamber LED tail lights
  2 LED front marker lights
  2 LED rear contour lights
  LED side marker lights
  2 licence plate lights
  2 7-pin sockets (1x DIN ISO 3731, 1x DIN ISO 1185) and 1 15-pin socket (DIN ISO 12098)
  Power connection(s) to semitrailer tractor not included

  LABELLING

  White reflecting contour marking strips on entire bottom length of side walls plus 2 top corners pursuant to ECE 48
  Red reflecting circumferential contour marking strip at back pursuant to ECE 48