4-axle low-loader trailer with offset platform

• Product details

  TYPE DESIGNATION

  4-AXLE LOW LOADER TRAILER – TYPE TÜ

  WEIGHTS

  Gross weight (techn.): 40 t
  Payload: approx. 32.1 t
  Gross weight (perm.): 24 t
  Tare weight: approx. 8 t

  DIMENSIONS

  Approx. 2,800 mm = raised platform at front incl. frame offset
  Approx. 5,200 or 5, 9 00 mm = drop-deck platform – flat load surface or external surfaces advanced
  Approx. 1,000 mm = rear access slope
  Total width: 2,550 mm or approx. 3,000 mm with extension
  Loading height, laden: approx. 870 mm

  FRAME

  Welded steel construction with flat front frame offset or body offset
  and drive-on taper at rear
  Excavator shovel recess = recess at rear between side members, approx. 1,850 mm long
  6 pairs of mounting pockets for 100 x 50 mm tubular steel posts in external frame
  (4 in the drop deck and 2 on raised platform)
  5 pairs of 3 t lashing bars at bottom of external frame
  8 pairs of recessed foldable 10 t lashing rings in floor ( 6 in drop deck and 2 on raised platform).

  CHASSIS

  Reinforced, maintenance-free parabolic springs

  Low-loader axles, each with 11 t axle load
  S-cam brake 300/200 mm, autom. brake linkage adjuster
  Dual-axle compensation at front and rear

  Tyres :
  16 x 2 4 5/7 0 R 17.5 14 3 J, manufacturer as per factory specifications
  16 steel wheel rims 6.75 x 17.5, 10-hole, with rim offset, silver

  BRAKE SYSTEM

  Brake system according to EC Directive 71/320 or EC E R13
  Two-line brake
  EBS – electronic brake system
  Wabco 4S3M = 1st and 3rd axles sensed
  Spring-loaded parking brake on 3rd and 4th axles
  Aluminium air tank

  FLOOR

  Spruce wood floor 50 mm, waterproofed, protruding approx. 5 – 10 mm beyond frame profiles or beyond steel stud plate cover over rear wheels

  EXTENSION

  Pull-out extensions, on both sides of drop deck and rear taper,
  extending parts hot-dip galvanised, incl. extension planks
  (track width of construction machines/vehicles to be transported must not exceed external frame width of 2,550 mm)

  2 pull-out/removable warning signs each at front and rear, extendible to 3,000 mm

  RAMPS

  2 foldable, 1-part loading ramps, approx. 2,800/750 mm
  with hardwood flooring,
  externally welded square ribs on ramps and
  rear access slope

  Ramp width manually adjustable , with rod (min. spacing approx. 300 mm up to max. total width of 2,8 1 0 mm)

  lockable in driving position using chains with turnbuckle
  2 autom. folding supports at rear
  Lifting aid with coil spring

  ELECTRICAL EQUIPMENT

  24 V lighting system according to EC Directive 76/756/E WG
  2 five-chamber LED tail lights on ramps
  LED side marker lights
  1 clearance lamp for each front warning sign and
  1 contour light on each rear warning sign
  Fixed cable(s) with 2 x 7-pin or 1 x 15-pin connector
  Bracket incl. revolving beacon on left ramp, with connecting cable and socket on end plate

  PAINTWORK

  Blasted with steel granulate, treated with zinc dust primer and spray painted 2-component acrylic paints for commercial vehicles (standard RAL or truck colour)

  Plastic and hot-dip galvanised parts (extensions etc.) unpainted,
  powder-coated attachments/installation parts and drawbar black

  Reflective contour marking strips across entire length of sides and on the rear (white on sides and red at rear by default), according to ECE 48

  ACCESSORIES

  Rear markings as per ECE standards

  ATTACHMENTS

  Wheel chock(s) as per regulations
  Plastic mudguards or splashguards with spray protection as per regulations
  Side impact protection
  Spare wheel well for 1 spare wheel on right in direction of travel
  1 accessory compartment at front centre of raised platform, with folding lid
  Externally welded square ribs on ramps and rear access slope
  Centre of gravity marking

  Brackets for extension planks on frame on left in direction of travel

  DRAWGEAR

  Fixed drawbar, 50 mm heavy-duty drawbar eye ,
  with silent bushing