4-axle low-loader semitrailer with offset platform

• Product details

  TYPE DESIGNATION

  4-AXLE LOW LOADER SEMITRAILER

  DIMENSIONS

  approx. 3,500/2,550 mm or approx. 2,480 mm between side walls = front offset platform
  Approx. 8,300/2,550 mm = drop-deck platform – flat load surface
  Approx. 1,000/2,550 mm = rear access slope
  Total width: approx. 2,550 mm or approx. 3,000 mm with extension
  Loading height, laden: approx. 900 mm
  Horizontal position of semitrailer at fifth-wheel height: laden approx. 1,220 mm

  FRAME

  Welded steel construction with tapered frame offset at front
  and drive-on taper at rear

  Replaceable 3.5″ kingpin (slew radius on truck at rear max: 2,100 mm)
  5 pairs of mounting pockets on drop deck incl. tubular posts 100 x 50 x 5 mm, useful height approx. 1,000 mm, hot-dip galvanised
  5 pairs of lashing points on external frame
  10 recessed lashing eyes in the drop-deck section
  Storage for extension planks below loading platform when not in use

  CHASSIS

  Air suspension with lifting and lowering device, for loading and unloading
  Automatic adjustment of driving level from 15 km/h

  Air-sprung low-loader unit with low-maintenance axles.
  4 x 10 t, (technical 4 x 12 t) wheelbase 3 x 1.310 mm.
  S-cam brake 300/200 mm, autom. brake linkage adjuster.

  1st and 2nd axles rigid,
  Third and fourth axles steering knuckle = friction-steered trailing
  (20° steering angle) incl. electropneum. reverse gear interlock with switch operation
  in cab and additional operation on semitrailer.

  Lifting first axle = raised or lowered automatically according to weight (with the lifting axle raised, the loading or total height increases by approx. 50 mm) as well as forced lowering autom. lifting axle, incl. integrated speed-restricted moving-off, with button operation in cab (no button on our part)

  Tyres :
  16 x 245/70 R 17,5, 146/146F, manufacturer as per factory specifications
  16 steel wheel rim, 10-hole, with rim offset, silver ex-works

  SUPPORT FIXTURES

  Mechan. 2 x 12 t support jacks, single-sided operation and thrust compensation

  BRAKE SYSTEM

  Brake system according to EC Directive 71/320 or E CE R13
  Two-line brake
  EBS – electronic brake system
  Wabco 2S2M = one axle sensed
  RSS – stability program
  Spring-loaded parking brake
  Steel air tank

  FLOOR

  Softwood floor 50 mm, waterproofed, protruding beyond frame profiles by approx. 5 mm at offset platform and 15 mm on drop deck, or beyond steel stud plate cover over rear wheels

  EXTENSION

  Pull-out extensions, on both sides of drop deck and rear taper, incl.
  continuous wooden boarding, extending parts hot-dip galvanised
  2 pull-out/removable warning signs each at front and rear
  Position or marker lights in each case, extendible to 3,000 mm

  RAMPS

  2 foldable, 1-part loading ramps, approx. 2,700/700 mm, with hardwood flooring
  Ramp width manually adjustable by approx. 580 mm, with rod,
  (min. spacing approx. 265 mm up to max. total width of 2,850 mm)
  lockable in driving position using chains with turnbuckle
  2 autom. folding supports at rear
  Lifting aid with coil spring

  ELECTRICAL EQUIPMENT

  24 V lighting system according to EC Directive 76/756/E WG
  2 five-chamber tail lights on ramps
  LED side marker lights
  2 clearance lamps
  2 contour lights
  2 x 7-pin sockets at front

  PAINTWORK

  Blasted with steel granulate, treated with zinc dust primer and spray painted 2-component acrylic paints for commercial vehicles
  Side and rear walls anodised
  Plastic and hot-dip galvanised parts unpainted,
  powder-coated attachments/installation parts black

  ACCESSORIES

  Rear markings as per ECE standards

  ATTACHMENTS

  Wheel chock(s) as per regulations
  Plastic mudguards or splashguards with spray protection as per regulations
  Spare wheel well for 1 spare wheel
  Side impact protection
  Pull-out/removable warning signs front and rear, incl. position and
  marker lights for wide loads up to 3,000 mm
  Externally welded square ribs on ramps and rear access slope
  Centre of gravity marking

  WALLS/POSTS

  Plug-in side walls on offset platform, 400 mm high
  Steel front wall,, 25 mm aluminium hollow profile walls at sides and rear, with latch-type tension locks, plug-in rear corner posts in side wall height

  CONTOUR MARKING

  Reflective contour marking strips across entire length of sides and on the rear (white on sides and red at rear by default), according to ECE 48