3-way tipper body for 3A truck – long-haul transport

• Product details

  TYPE DESIGNATION

  3-WAY TIPPER BODY ON 3-AXLE TRUCK – LONG-HAUL TRANSPORT
  For pallet and grain transport etc.

  WEIGHTS

  Body weight: approx. 2.9 t

  DIMENSIONS

  Internal length: approx. 7,100 mm
  Internal width: approx. 2,460 mm
  Total width: 2,550 mm

  Body height, loading height etc. can only be checked and announced upon specification of the exact truck data

  PAINTWORK

  Blasted with steel granulate, treated with zinc dust primer and spray painted
  2-component acrylic paints for commercial vehicles (standard RAL or truck colour)

  Plastic and hot-dip galvanised parts unpainted,
  powder-coated attachments black

  Reflective contour marking strips across entire length of sides (continuing onto truck cab) and
  all-round contour marking at rear (white on sides and red at rear by default), according to ECE 48

  ACCESSORIES

  Rear markings as per ECE standards

  ATTACHMENTS

  Tipper body rubber centre support
  Bracket for wheel chock(s)
  Tarpaulin hooks on hinges
  Rubber bump stops on end plate

  SIDE WALLS

  Grain-tight side wall mounting with labyrinth sealing system
  Fixed steel plate front wall, 3 mm, approx. 1,640 mm high
  2-part aluminium hollow profile side walls, 40 mm, approx. 980 mm high,
  (top and bottom profiles reinforced 4/2 mm, 3 x 200 mm intermediate profiles 2/2 mm),
  with vertical special sealing groove, without bracket recess, foldable with extended swivel bolt locks
  and spring lifting aid, hinged with man. central locking (operated separately for each wall)
  Aluminium hollow profile rear wall, 40/2/2 mm, approx. 980 mm high,
  foldable with extended swivel bolt locks and hinged with man. central locking

  SUBFRAME

  Continuous side members with tilt cylinder bearings and outriggers
  Low body height
  Connector lock for tipper body with cross-over protection

  HIGH-PRESSURE HYDRAULIC TIPPING SYSTEM

  20 t tilt cylinder for 3-way tipping, with safety rope,
  Rearward tipping angle: approx. 38°
  60 l pump for direct flange mounting, 45 l oil reservoir with oil filling,
  pneum. tip valve with overpressure protection and actuation in cab

  TIPPING LOADING RAMP

  Full-steel welded construction with fine-grained special steel floor panels, 5 mm
  (slight floor unevenness possible due to weld distortion)

  POSTS

  2 fixed front corner posts, integrated in front wall
  2 foldable centre posts, in side wall height
  2 fixed rear corner posts, welded to sides, in side wall height
  Tension chain with fastener for centre posts