3-axle timber/stanchion trailer – with platform

• Product details

  TYPE DESIGNATION

  3-AXLE STANCHION PLATFORM TRAILER

  WEIGHTS

  Gross weight (techn.): 27 t
  Gross weight (perm.): 24 t
  Tare weight: approx. 4.7 t

  DIMENSIONS

  Platform length: approx. 7,000 mm
  Total width: 2,550 mm
  Loading height, unladen: approx. 1,380 mm

  FRAME

  Naxtra welded steel frame construction
  Reinforced external lashing frame, 5 mm
  Low-maintenance ball bearing turntable
  11 pairs of recessed 4 t lashing points

  CHASSIS

  Air suspension without lifting and lowering device,
  bellow diameter 360 mm

  Low-maintenance air-sprung axles, each with 9 t axle load
  S-cam brake 420/180 mm, autom. brake linkage adjuster
  Reinforced axle beam (off-road version)

  Tyres:
  6 x 385/65 R 22.5 160J, manufacturer as per factory specifications
  6 steel wheel rims 11.75 x 22.5, 10-hole, without rim offset, silver

  DRAWGEAR

  Fixed drawbar, 40 mm drawbar eye, brought together at the front (Y design) with silent bushing and mechanical fork lock

  BRAKE SYSTEM

  Brake system according to EC Directive 71/320 or ECE R13
  Two-line brake
  EBS
  Wabco 4S3M = 1st and 3rd axles sensed
  RSS – stability program
  Spring-loaded parking brake on 2nd and 3rd axles

  FLOOR

  Steel stud plate, 5/7 mm, tack-welded

  ELECTRICAL EQUIPMENT

  24 V lighting system according to EC Directive 76/756/EEC
  2 seven-chamber tail lights in underride protection
  LED side marker lights
  2 clearance lamps
  2 contour lights
  Fixed cable(s) with 2 x 7-pin or 1 x 15-pin connector

  PAINTWORK

  Blasted with steel granulate, treated with zinc dust primer and spray painted
  2-component acrylic paints for commercial vehicles (standard RAL or truck colour)

  Stanchions in original orange signal colour
  Plastic and hot-dip galvanised parts unpainted,
  powder-coated attachments/installation parts black

  Reflective contour marking strips across entire length of sides and on the rear (white on sides and red at rear by default), according to ECE 48

  ACCESSORIES

  Rear markings as per ECE standards

  ATTACHMENTS

  Wheel chock(s) as per regulations
  Plastic mudguards with spray protection as per regulations (non-removable)
  Aluminium underride protection, coated white
  “Schwarzmüller” rubber apron on the underride protection, over the entire width
  Side impact protection made from aluminium profiles as per regulations, coated black

   

   

  STANCHIONS

  4 recessed stanchion pockets on both left and right incl. reinforcement brackets
  4 pairs of 2-part ExTe stanchions 144-S with bolt fastening, load height:
  max. 2,800 mm, load capacity of stanchions: max. 7 t per pair (minimal
  stanchion inclination inwards), distribution: approx. 800 mm from front, then approx. 1,800 mm, approx. 1,800 mm, approx. 1,800 mm