3-axle timber/stanchion semitrailer – without platform

• Product details

  TYPE DESIGNATION

  3-AXLE STANCHION SEMITRAILER – WITHOUT PLATFORM

  WEIGHTS

  Gross train weight (perm.): 44 t in combined transport or with certificate of exemption
  Gross weight (techn.): 39 t
  Axle assembly load (techn.): 27 t
  Fifth-wheel load (techn.): 12 t
  Tare weight: approx. 5. 4 t

  DIMENSIONS

  Frame length: approx. 13,000 mm
  Total width: 2,550 mm
  Fifth-wheel height, unladen: approx. 1,150 mm (= approx. horizontal position of semitrailer)
  Loading height up to upper stanchion edge approx. 360 mm over fifth-wheel height

  FRAME

  Naxtra lightweight welded steel frame construction, straight,
  without body cross members, without external frame and without end plates
  Replaceable 2″ kingpin (EC installation dimension)
  gripper deflector plates approx. 200 mm long

  CHASSIS

  Air suspension without lifting and lowering device,
  bellow diameter 360 mm

  air suspension unit with low-maintenance 430 mm disc brake axles, 3 x 9 t rigid, wheelbase 1,310 + 1,410 mm (for 27 t unit load)
  Reinforced axle beam (off-road version)

  Autom. lifting front axle = raised or lowered according to weight, as well as forced lowering incl. integr. speed-restricted moving-off aid with button operation in cab (with the lifting axle raised, the loading height or total height increases by approx. 50 mm)

  Tyres :
  6 x 385/65 R 22.5 160J, manufacturer as per factory specifications
  6 steel wheel rims 11.75 x 22.5, 10-hole, 120 mm rim offset, silver

  BRAKE SYSTEM

  Brake system according to EC Directive 71/320 or E CE R13
  Two-line brake
  EBS – electronic brake system
  Wabco 2S2M = one axle sensed
  RSS – stability program
  Spring-loaded parking brake on 2 axles
  Steel air tank

  FLOOR

  Cover between frame side members above chassis and
  up to kingpin at front made from 3/5 mm steel stud plate, tack-welded

  STANCHION BODY

  6 ExTe trailer stanchions 144-S with 2-part stanchions incl. bolt fastening,
  load height: max. 2,800 mm, load capacity of stanchions: max. 7 t per pair (minimal inward inclination of stanchions, thus also suitable for timber transport)
  Trailer stanchions mounted via welded clamp fastening = movable
  1 lashing point for belt hooks per stanchion on left and right

  ELECTRICAL EQUIPMENT

  24 V lighting system according to EC Directive 76/756/ EWG
  2 seven-chamber tail lights in underride protection
  LED side marker lights
  2 clearance lamps
  2 contour lights on underride protection
  2 x 7-pin and 1 x 15-pin socket
  3-pin socket in underride protection at rear

  PAINTWORK

  Blasted with steel granulate, treated with zinc dust primer and spray painted 2-component acrylic paints for commercial vehicles (standard RAL or truck colour)

  Stanchions in original orange signal colour
  Plastic and hot-dip galvanised parts unpainted,
  powder-coated attachments/installation parts black

  Reflective contour marking strips across entire length of sides and on the rear (white on sides and red at rear by default), according to ECE 48

  ACCESSORIES

  Rear markings as per ECE standards

  ATTACHMENTS

  Wheel chock(s) as per regulations
  6 single wheel plastic mudguards with spray protection as per regulations (non-removable)
  Aluminium underride protection, coated white
  “Schwarzmüller” rubber apron on underride protection across the entire width
  Side impact protection made from aluminium profiles as per regulations, coated black
  1 spare wheel bracket for 1 spare wheel
  1 plastic toolbox, lockable, unpainted , with upper sheet covering

  SUPPORT FIXTURES

  Mechan. 2 x 12 t support jacks, single-sided operation and thrust compensation, manufacturer as per factory specifications