3-axle timber/stanchion semitrailer – with platform

• Product details

  TYPE DESIGNATION

  3-AXLE STANCHION PLATFORM SEMITRAILER

  WEIGHTS

  Gross train weight (perm.): 44 t in combined transport or with certificate of exemption
  Gross weight (techn.): 39 t
  Axle assembly load (techn.): 27 t
  Fifth-wheel load (techn.): 12 t
  Tare weight: approx. 7. 1 t

  DIMENSIONS

  Platform length: approx. 13,500 mm
  Platform width: approx. 2,5 4 0 mm
  Total width: 2,550 mm

  Loading height: approx. 220 mm over fifth-wheel height
  Horizontal position of semitrailer, unladen, at fifth-wheel height of 1,150 mm

  FRAME

  Welded steel frame construction
  Reinforced external lashing frame, 5 mm
  12 pairs of recessed 4 t lashing points
  Replaceable 2″ kingpin (EC installation dimension, width across corners: 2,040 mm)

  CHASSIS

  Air suspension without lifting and lowering device,
  bellow diameter 360 mm

  air suspension unit with low-maintenance 430 mm disc brake axles, 3 x 9 t rigid, wheelbase 1,310 + 1,410 mm (for 27 t unit load)
  Reinforced axle beam (off-road version)

  Autom. lifting front axle = raised or lowered according to weight, as well as forced lowering incl. integr. speed-restricted moving-off aid with button operation in cab (with the lifting axle raised, the loading height or total height increases by approx. 50 mm)

  Tyres :
  6 x 385/65 R 22.5 160J, manufacturer as per factory specifications
  6 steel wheel rims 11.75 x 22.5, 10-hole, 120 mm rim offset, silver

  BRAKE SYSTEM

  Brake system according to EC Directive 71/320 or E CE R13
  Two-line brake
  EBS – electronic brake system
  Wabco 2S2M = one axle sensed
  RSS – stability program
  Spring-loaded parking brake on 2 axles
  Steel air tank

  FLOOR

  Steel stud plate floor, 5/7 mm, tack-welded

  ELECTRICAL EQUIPMENT

  24 V lighting system according to EC Directive 76/756/E WG
  2 seven-chamber tail lights in underride protection
  LED side marker lights
  2 clearance lamps
  2 contour lights on underride protection
  2 x 7-pin and 1 x 15-pin socket
  3-pin socket at rear

  PAINTWORK

  Blasted with steel granulate, treated with zinc dust primer and spray painted 2-component acrylic paints for commercial vehicles (standard RAL or truck colour)

  Stanchions in original orange signal colour
  Plastic and hot-dip galvanised parts unpainted,
  powder-coated attachments/installation parts black

  Reflective contour marking strips across entire length of sides and on the rear (white on sides and red at rear by default), according to ECE 48

  ACCESSORIES

  Rear markings as per ECE standards

  ATTACHMENTS

  Wheel chock(s) as per regulations
  Single wheel plastic mudguards with spray protection as per regulations (non-removable)
  Aluminium underride protection, coated white
  “Schwarzmüller” rubber apron on underride protection across the entire width
  Side impact protection made from aluminium profiles as per regulations, coated black
  1 spare wheel bracket for 1 spare wheel
  1 plastic toolbox, lockable, unpainted

  STANCHIONS

  6 recessed stanchion pockets on both left and right incl. reinforcement brackets
  6 pairs of 2-part ExTe stanchions 144-S with bolt fastening,
  load height: max. 2,800 mm, load capacity of stanchions: max. 7 t per pair (minimal inward inclination of stanchions, thus also suitable for timber transport)

  SUPPORT FIXTURES

  Mechan. 2 x 12 t support jacks, single-sided operation and thrust compensation, manufacturer as per factory specifications

  SIDE WALLS

  Extra strong steel profile front wall, approx. 2,500 mm high, with centre supports, lateral corner reinforcement plates and brush bracket