3-axle sliding tarpaulin platform semitrailer with twin-level loading system

• Product details

  TYPE DESIGNATION

  3-AXLE SLIDING TARPAULIN PLATFORM SEMITRAILER WITH TWIN-LEVEL LOADING SYSTEM

  DIMENSIONS

  Internal body dimension: approx. 13,620/2,480 mm
  Total width: 2,550 mm
  Load space internal height: approx. 2,720 mm
  Lateral loading height below guide rail: approx. 2,620 mm
  Internal width between guide rails: approx. 2,430 mm
  Portal loading height: approx. 2,620 mm
  Portal loading width: approx. 2,480 mm
  Loading height: approx. 125 mm over fifth-wheel height

  FRAME

  Welded steel frame construction
  Replaceable 2″ kingpin, EC installation dimension,
  23 pairs of recessed 2.5 t lashing points according to UVV

  CHASSIS

  Air suspension with lifting and lowering device (approx. +120/-80 mm)
  Automatic adjustment of driving level from 15 km/h

  Air suspension unit with low-maintenance disc brake axles,
  ø 430 mm, 3 x 9 t rigid, wheelbase 2 x 1,310 mm

  Tyres :
  6 x 385/65 R 22.5 160J, manufacturer as per factory specifications
  6 steel wheel rims 11.75 x 22.5, 10-hole, 120 mm rim offset, silver ex-works

  Spare wheel :
  385/65 R 22.5 160J, manufacturer as per factory specifications
  Steel wheel rim 11.75 x 22.5, 10-hole, 120 mm rim offset, silver ex-works

  SUPPORT FIXTURES

  Mechan. 2 x 12 t support jacks, single-sided operation and thrust compensation

  BRAKE SYSTEM

  Brake system according to EC Directive 71/320 or ECE R13
  Two-line brake
  EBS – electronic brake system
  Wabco 2S2M = one axle sensed
  RSS – stability program
  Spring-loaded parking brake on 2 axles
  Steel air tank

  FLOOR

  Resin-coated plywood floor, 27 mm, flush with external frame
  2 steel top-hat rails over the longitudinal beams
  (floor load capacity 7 t, stacker axle load according to CSC)

  ELECTRICAL EQUIPMENT

  24 V lighting system according to EC Directive 76/756/EWG
  2 seven-chamber tail lights in underride protection
  LED side marker lights
  2 clearance lamps
  2 contour lights on underride protection
  2 x 7-pin and 1 x 15-pin socket

  PAINTWORK

  Blasted with steel granulate, treated with zinc dust primer and spray painted with 2-component acrylic paints for commercial vehicles
  Plastic and hot-dip galvanised parts unpainted,
  powder-coated attachments/installation parts black

  ACCESSORIES

  Rear markings as per ECE standards

  ATTACHMENTS

  Rear crash guard with corner post protection
  Wheel chock(s) as per regulations
  Single wheel plastic mudguards with spray protection as per regulations
  Aluminium underride protection, coated white
  Side impact protection made from aluminium profiles as per regulations, coated black
  1 spare wheel bracket for 1 spare wheel (rear right)
  1 plastic toolbox, lockable, unpainted, on left after axle

  SIDE WALLS/SLIDING TARPAULIN

  Fixed aluminium hollow profile front wall, 2,400 mm, with 2 centre supports,
  2 lashing rings for load securing, closed with tarpaulin at top
  Front wall reinforced inside with galvanised steel plate,
  approx. 650 mm high

  Plastic sliding tarpaulins on both sides with load certification according to Code XL; welded horizontal and vertical strap reinforcements incl. direct turnbuckles (without strap) as well as front and rear bolt locks, openable on all 4 corners, with ratchet tensioner at rear,
  tarpaulin manufacturer as per factory specifications, tarpaulin colour according to availability
  Aramid-reinforced plastic roof tarpaulin, translucent
  Without Carnet customs seal and without tarpaulin rope/brackets for load space closure

  Bolted portal at rear with aluminium corner posts, upper crossbeam with
  forward-sliding cover, incl. fully opening double door covering entire load space height, each leaf equipped with 2 internal espagnolettes.

  POSTS/COVER – REINFORCED FOR TWIN-LEVEL LOADING SYSTEM

  2 fixed aluminium corner posts at front, bolted, protruding from sides
  10 reinforced centre posts, movable across entire length
  2 rows of aluminium pointed slats, 100/25 mm, incl. Jungfalk slat pockets and with special guide heads for twin-level system

  Strap anchoring on front and rear corner posts, and strap cross-bracing on 2nd and 4th centre posts

  Versus sliding cover with plastic brackets, forward-sliding with automatic elevation, limited backward movement (opened from above) = pushed together in loading area, without inclination, with vertical and horizontal guide rollers = smooth operation
  Aluminium guide rail profile on both sides for sliding tarpaulins and posts,
  design height 140 mm
  Control rod for sliding tarpaulin (bracket on interior side protection)

  TWIN-LEVEL LOADING SYSTEM

  Height-adjustable twin-level loading system CTD III =
  6 load areas for 11 x 3 EURO pallets
  400 kg/pallet load capacity,
  22 aluminium load beams with retainers,
  height-adjustable from approx. 780 to 1,870 mm from floor
  2 locking beams on portal frame

  CONTOUR MARKINGS

  Reflective contour marking strips across entire length of sides and all-round contour marking at rear (white on sides and red at rear by default), according to ECE 48