SM trailers - Official importer of Schwarzmueller for Bulgaria,
Greece and Northern Macedonia.
SM trailers - Official importer of Schwarzmueller for Bulgaria,
Greece and Northern Macedonia.
3-AXLE LARGE-SCALE SLIDING TARPAULIN PLATFORM
SEMITRAILER RH80 – COMBINED TRANSPORT
Gross train weight (perm.): 45 t
Gross weight (techn.): 39 t
Axle assembly load (techn.): 27 t
Fifth-wheel load (techn.): 12 t
Tare weight: approx. 7. 2 t
Internal platform length: approx. 13,620 mm
Internal platform width: approx. 2,480 mm
Total width: 2,550 mm
Load space internal height: approx. 2,925 mm
Lateral loading height below guide rail: approx. 2,770 mm
Internal width between guide rails: approx. 2,490 mm
Portal loading height: approx. 2,740 mm
Portal loading width: approx. 2,480 mm
Internal/total height adjustable by 60 mm = 2nd load space height
Load space internal height: approx. 2,985 mm
Lateral loading height below guide rail: approx. 2,830 mm
Portal loading height: approx. 2,820 mm
Loading height: approx. 80 mm over fifth-wheel height
Suitable for mega-wagons type T 5, T 3000 and AAE-Twin for rail profile
P 400 = total height max. 4,000 mm with lowered air suspension and
trestle height 880 mm = horizontal position of semitrailer
Welded steel frame construction in special low design, reinforced with
4 grip edges for crane-based rail loading
Frame for unladen fifth-wheel height of 960 – 1,000 mm with air-sprung STT
Replaceable 2″ kingpin (EC installation dimension,
width across corners: 2,040 mm)
Perforated external frame with approx. 100 mm hole spacing, 40/25 mm slot according to DIN EN 12640 and 23 pairs of recessed 2.5 t lashing points
Air suspension with lifting and lowering device, approx. 200 mm (approx. +120/-60 mm)
Automatic adjustment of driving level from 15 km/h
air suspension unit with low-maintenance 370 mm disc brake axles, with split piston for use in combined transport
3 x 9 t rigid, wheelbase 1,410 + 1,310 mm (for 27 t rear axle load)
Tyres :
6 x 435/50 R 19.5 160J, Goodyear Fuelmax T
6 steel wheel rims 14.00 x 19.5, 10-hole, with rim offset, silver
Mechan. 2 x 12 t support jacks, single-sided operation and thrust compensation, manufacturer as per factory specifications
Brake system according to EC Directive 71/320 or ECE R13
Two-line brake
EBS – electronic brake system
Wabco 2S2M = one axle sensed
RSS – stability program
Spring-loaded parking brake on 2 axles
Steel air tank
Up to approx. 4,100 mm length at front made from 30 mm resin-coated plywood, followed by 30 mm spruce planks to frame end
Galvanised steel omega profiles in subfloor
Secondary floor made from resin-coated birch plywood, 9 mm, flush with external frame
24 V lighting system according to EC Directive 76/756/EWG
2 seven-chamber tail lights in underride protection
LED side marker lights
2 clearance lamps
2 contour lights on underride protection
2 x 7-pin and 1 x 15-pin socket
Blasted with steel granulate, treated with zinc dust primer and spray painted with 2-component acrylic paints for commercial vehicles (standard RAL or truck colour)
Plastic and hot-dip galvanised parts unpainted,
powder-coated attachments/installation parts black
Reflective contour marking strips across entire length of sides and all-round contour marking at rear (white on sides and red at rear by default), according to ECE 48
Rear markings as per ECE standards (horizontal on rear doors/rear wall)
Assembly of provided codification plates
Rear crash guard with portal post protection and lower post reinforcement
Wheel chock(s) as per regulations
1 x retractable step unit at rear right
Single wheel plastic mudguards with spray protection as per regulations
Aluminium tarpaulin mounting strips bolted on both sides of external frame
Aluminium underride protection, coated white
Side impact protection made from aluminium profiles as per regulations, coated black
1 spare wheel bracket for 1 spare wheel, mounted with winch behind support jacks
1 plastic toolbox, lockable, unpainted
1 document box on front wall
Fixed aluminium hollow profile front wall, 2,550 mm, with 2 centre supports,
2 lashing rings inside for load securing
Closed with tarpaulin over front wall, in same colour as side tarpaulin
Front wall reinforced inside with galvanised steel plate,
approx. 650 mm high
Plastic sliding tarpaulins on both sides with load certification according to Code XL; welded horizontal and vertical strap reinforcements incl. lower fastening straps with flat hooks and stainless steel
DB turnbuckles as well as front and rear bolt locks, openable on
all 4 corners, with ratchet tensioner at rear
tarpaulin sealed against external frame,
tarpaulin manufacturer as per factory specifications, tarpaulin colour according to availability
Aramid tarpaulin protection (yellow) applied over grip edges
Aramid-reinforced plastic roof tarpaulin, flame retardant according to “DIN 4102 ÖNORM B1” as per national rail standards, translucent
Bolted portal at rear with aluminium corner posts, upper crossbeam with forward-sliding cover, incl. fully opening double door in profile design covering entire load space height, each leaf equipped with 2 internal espagnolettes
2 fixed aluminium corner posts at front, bolted, protruding from sides
3 centre posts on left in direction of travel, movable across entire length, for lifting roof incl. Expander lifting aid
3 centre posts on right in direction of travel, movable across entire length, for lifting roof incl. Expander lifting aid
3 additional post pockets on both sides
4 rows of slat pockets, 1st pocket row at bottom 460 mm, spacing
approx. 160/600/600 mm, with 4 rows of aluminium pointed slats 100/25 mm
Manually operated hydraulic lifting roof, 400 mm elevation, with lever operation on corner posts, for loading and unloading (portal doors must be opened)
Versus sliding cover with plastic brackets, reinforced cross bows (as per national rail standards), forward-sliding with automatic elevation = pushed together in loading area, with vertical and horizontal guide rollers = smooth operation
Aluminium pallet guide rail profile on both sides for sliding tarpaulins and posts, design height 195 mm
Control rod for sliding tarpaulin (bracket on interior side protection)
Contact your preferred office and we will do our best to solve all your challenges
Get intouch
Всички права запазени. © 2024 SM Trailers | Bulgaria
Web Design Bulgaria - Dankanic Creative