3-axle platform semitrailer – extendible

• Product details

  TYPE DESIGNATION

  3-AXLE PLATFORM SEMITRAILER FOR CONSTRUCTION STEEL MAT TRANSPORT

  DIMENSIONS

  Platform length: approx. 13,500 mm
  Platform width approx. 2,530 mm or max. 2,550 mm stainless steel guide plates
  Loading height = approx. 230 mm over fifth-wheel height

  FRAME

  Welded steel frame construction, reinforced for 25 t point load at centre of gravity across 3 m load length
  Frame suitable for unladen fifth-wheel height of 1,130-1,220 mm with air-sprung STT
  Replaceable 2″ kingpin, suitable for 2-axle tractor,
  rear slew radius on truck: max. 1,900 mm)

  Reinforced external frame, 5 mm, lateral ø 30 mm drill holes – for lashing strap attachment
  24 pairs of recessed 4 t lashing points, on both sides of external frame, evenly spaced

  6 pairs of manually extendible racks for 80×80 mm tubular posts, adjustable for load widths between 2,000 and 3,100 mm (extendible to 3,500 mm for loading and unloading), lockable at intervals of approx. 50 mm.
  Plus 6 pairs of lightweight tubular steel posts, 80×80 mm,
  useful height 1,850 mm, with welded lower lashing eyes on both sides, hot-dip galvanised

  3 x 3 pairs of racks on outside side members, mounted longitudinally,
  for 80×80 mm tubular posts – for load securing at front and rear
  when transporting 2 x approx. 6,000 mm construction steel mats

  Additional 3 pairs of racks on both sides of external frame, for 80×80 mm tubular posts
  Incl. 3 pairs of lightweight tubular steel posts, 80×80 mm, useful height approx. 1,850 mm high, with cable guide for strap anchoring at top, hot-dip galvanised

  4 wire ropes and 8 ratchet lashing straps, approx. 3,000 mm long, as restraints for tubular steel posts

  6 lashing winches with 8 mm wire rope, on left in direction of travel.
  Plus 1 removable, slip-on gear mechanism for lashing winches

  6 pairs of riveted stainless steel guide plates with stainless steel round bar welded to top, in area of rope tensioners and clamps

  CHASSIS

  Air suspension with lifting and lowering device (approx. +120/-80 mm)
  Automatic adjustment of driving level from 15 km/h

  Air suspension unit with low-maintenance disc brake axles,
  ø 430 mm, 3 x 9 t rigid, wheelbase 2 x 1,310 mm

  Tyres :
  6 x 385/65 R 22.5 160J, manufacturer as per factory specifications
  6 steel wheel rims 11.75 x 22.5, 10-hole, 120 mm rim offset, silver ex-works

  SUPPORT FIXTURES

  Mechan. 2 x 12 t support jacks, single-sided operation and thrust compensation

  BRAKE SYSTEM

  Two-line brake
  EBS – electronic brake system (Wabco 2S2M)
  RSS – stability program
  Spring-loaded parking brake on 2 axles
  Steel air tank

  FLOOR

  Spruce softwood floor, 35 mm, lengthwise with rebate
  Secondary floor made from resin-coated birch plywood, 9 mm, flush with external frame

  SIDE WALLS

  Fixed profiled steel plate front wall, 2,000 mm high, with tapered corners, approx. 200/200 mm, each with 1 eyelet at top for diagonal bracing

  Retaining bracket for 18 tubular posts, 80×80 mm, length approx. 2,000 mm, for horizontal storage against front wall (reduces useable platform length)

  ELECTRICAL EQUIPMENT

  Fully compliant with motor vehicle regulations – 24 V
  2 seven-chamber tail lights in underride protection
  Side marker lights
  2 clearance lamps
  2 contour lights
  2 x 7-pin and 1 x 15-pin socket
  1 revolving beacon incl. bracket, connecting cable and socket, mounted in underride protection

  PAINTWORK

  Blasted with steel granulate, treated with zinc dust primer and spray painted 2-component acrylic paints for commercial vehicles

  ACCESSORIES

  Rear markings as per ECE standards

  ATTACHMENTS

  Crash guard across rear
  Wheel chock(s) as per regulations
  Single wheel plastic mudguards with spray protection as per regulations
  Aluminium underride protection, coated white
  Side impact protection
  Spare wheel bracket for 1 spare wheel
  1 standard plastic toolbox

  Pull-out warning signs, incl. position and marker lights for wide loads up to 3,100 mm, front warning signs transferable to platform – for
  construction steel mat transports

  CONTOUR MARKINGS

  Reflective contour marking strips across entire length of sides and all-round contour marking at rear (white on sides and red at rear by default), according to ECE 48