3-axle platform semitrailer – building materials

• Product details

  TYPE DESIGNATION

  3-AXLE PLATFORM SEMITRAILER RH125 P – BUILDING MATERIALS

  WEIGHTS

  Gross train weight (perm.): 40 t
  Gross weight (techn.): 39 t
  Axle assembly load (techn.): 27 t
  Fifth-wheel load (techn.): 12 t
  Tare weight: approx. 5. 6 t

  DIMENSIONS

  Internal platform length: approx. 13,620 mm
  Internal platform width: approx. 2,480 mm
  Total width: 2,550 mm
  Loading height: approx. 125 mm over fifth-wheel height

  FRAME

  Welded steel frame construction, reinforced for 2 0 t point load
  over 4 m at centre of mass
  Frame for unladen fifth-wheel height of 1,150 – 1,220 mm with air-sprung STT
  Replaceable 2″ kingpin (EC installation dimension,
  width across corners: 2,040 mm)
  23 pairs of recessed 2.5 t lashing points according to UVV

  CHASSIS

  Air suspension with lifting and lowering device (approx. +120/-80 mm)
  Automatic adjustment of driving level from 15 km/h

  Air suspension unit with low-maintenance 430 mm disc brake axles,
  3 x 9 t rigid, wheelbase 2 x 1,310 mm

  Tyres :
  6 x 385/65 R 22.5 160J, manufacturer as per factory specifications
  6 steel wheel rims 11.75 x 22.5, 10-hole, 120 mm rim offset, silver

  SUPPORT FIXTURES

  Mechan. 2 x 12 t support jacks, single-sided operation and thrust compensation, manufacturer as per factory specifications

  BRAKE SYSTEM

  Brake system according to EC Directive 71/320 or ECE R13
  Two-line brake
  EBS – electronic brake system
  Wabco 2S2M = one axle sensed
  RSS – stability program
  Spring-loaded parking brake on 2 axles
  Steel air tank

  FLOOR

  Reinforced body design in accordance with DIN EN 12642 Code XL load securing certificate
  Resin-coated plywood floor, 27 mm, flush with external frame
  2 steel top-hat rails over the longitudinal beams
  (floor load capacity 7 t, stacker axle load according to CSC)

  SIDE WALLS

  Fixed aluminium hollow profile front wall, 1,200 mm, with 2 centre supports,
  2 lashing rings inside for load securing
  Front wall reinforced inside with galvanised steel plate,
  approx. 650 mm high

  4-part aluminium hollow profile side walls, 1,000/25 mm, with vertical and horizontal rubber seal and internally riveted frame, foldable with Kinnegrip double locking
  Foldable aluminium hollow profile rear wall, 1,000 mm high, with vertical and horizontal rubber seal and internally riveted frame,
  foldable with Kinnegrip double locking
  2 folding steps

  ELECTRICAL EQUIPMENT

  24 V lighting system according to EC Directive 76/756/EWG
  2 seven-chamber tail lights in underride protection
  LED side marker lights
  2 clearance lamps
  2 contour lights on underride protection
  2 x 7-pin and 1 x 15-pin socket

  PAINTWORK

  Blasted with steel granulate, treated with zinc dust primer and spray painted with 2-component acrylic paints for commercial vehicles (standard RAL or truck colour)

  Plastic and hot-dip galvanised parts unpainted,
  powder-coated attachments/installation parts black

  Reflective contour marking strips across entire length of sides and all-round contour marking at rear (white on sides and red at rear by default), according to ECE 48

  ACCESSORIES

  Rear markings as per ECE standards (horizontal on rear doors/rear wall)

  ATTACHMENTS

  Aluminium crash guard across rear
  Wheel chock(s) as per regulations
  Single wheel plastic mudguards with spray protection as per regulations
  Aluminium underride protection, coated white
  Side impact protection made from aluminium profiles as per regulations, coated black
  1 spare wheel bracket for 1 spare wheel (rear right)
  1 plastic toolbox, lockable, unpainted , on left after axle

  POSTS

  Integrated extended lever locks, Kinnegrip system
  2 front corner posts, bolted, protruding from sides, in front wall height
  6 Kinnegrip centre posts, foldable and removable, in side wall height
  2 rear Kinnegrip corner posts, foldable and removable, side-mounted, in side wall height