3-AXLE LARGE-SCALE SLIDING TARPAULIN PLATFORM SEMITRAILER RH80
Gross train weight (perm.): 40 t
Gross weight (techn.): 39 t
Axle assembly load (techn.): 27 t
Fifth-wheel load (techn.): 12 t
Tare weight: approx. 6. 3 t
Internal platform length: approx. 13,620 mm
Internal platform width: approx. 2,480 mm
Total width: 2,550 mm
Load space internal height: approx. 2,945 mm
Lateral loading height below guide rail: approx. 2,790 mm
Internal/total height adjustable by 60 mm = 2nd load space height approx. 3,005 mm
Internal width between guide rails: approx. 2,490 mm
Portal loading height: approx. 2,760 mm
Portal loading width: approx. 2,480 mm
Loading height: approx. 80 mm over fifth-wheel height
Welded steel frame construction in special low design
Frame for unladen fifth-wheel height of 960 – 1,050 mm
with air-sprung STT
Replaceable 2″ kingpin (EC installation dimension, width across corners: 2,040 mm)
Perforated external frame (starting approx. 3,000 mm from front wall) holes approx. 100 mm apart , 40/25 mm slot according to DIN EN 12640 and 23 pairs of recessed 2.5 t lashing points
Air suspension with lifting and lowering device, approx. 250 mm
(approx. +180/-70 mm)
Automatic adjustment of driving level from 15 km/h
air suspension unit with low-maintenance 370 mm disc brake axles
3 x 9 t rigid, wheelbase 2 x 1,310 mm
Tyres :
6 x 435/50 R 19.5 160J, Goodyear Fuelmax T
6 steel wheel rims 14.00 x 19.5, 10-hole, with rim offset, silver
Mechan. 2 x 12 t support jacks, single-sided operation and thrust compensation, manufacturer as per factory specifications
Brake system according to EC Directive 71/320 or EC E R13
Two-line brake
EBS – electronic brake system
Wabco 2S2M = one axle sensed
RSS – stability program
Spring-loaded parking brake on 2 axles
Steel air tank
Resin-coated plywood floor, 27 mm, flush with external frame
2 steel top-hat rails above the longitudinal beams
(floor load capacity: 7 t stacker axle load acc. to CSC)
24 V lighting system according to EC Directive 76/756/E WG
2 seven-chamber tail lights in underride protection
LED side marker lights
2 clearance lamps
2 contour lights on underride protection
2 x 7-pin and 1 x 15-pin socket
Blasted with steel granulate, treated with zinc dust primer and spray painted with 2-component acrylic paints for commercial vehicles (standard RAL or truck colour)
Plastic and hot-dip galvanised parts unpainted,
powder-coated attachments/installation parts black
Reflective contour marking strips across entire length of sides and all-round contour marking at rear (white on sides and red at rear by default), according to ECE 48
Rear markings as per ECE standards (horizontal on rear doors/rear wall)
Rear crash guard with portal post protection and lower post reinforcement
Wheel chock(s) as per regulations
1 x retractable step unit at rear right
Single wheel plastic mudguards with spray protection as per regulations
Aluminium tarpaulin mounting strips bolted on both sides of external frame
Aluminium underride protection, coated white
Side impact protection made from aluminium profiles as per regulations, coated black
1 spare wheel bracket for 1 spare wheel (on right after axle)
1 plastic toolbox, lockable, unpainted , on left after axle
Fixed aluminium hollow profile front wall, 2,550 mm, with 2 centre supports,
2 lashing rings inside for load securing
Closed with tarpaulin over front wall, in same colour as side tarpaulin
Front wall reinforced inside with galvanised steel plate, approx. 650 mm high
Plastic sliding tarpaulins on both sides with load certification according to Code XL; welded horizontal and vertical strap reinforcements incl. lower fastening straps with flat hooks and stainless steel turnbuckles as well as front and rear bolt locks, openable on all 4 corners, with ratchet tensioner at rear,
t arpaulin sealed against external frame ,
tarpaulin manufacturer as per factory specifications, tarpaulin colour according to availability
Aramid-reinforced plastic roof tarpaulin, translucent
Bolted portal at rear with aluminium corner posts, upper crossbeam with forward-sliding cover, incl. fully opening double door in profile design covering entire load space height, each leaf equipped with 2 internal espagnolettes
2 fixed aluminium corner posts at front, bolted, protruding from sides
3 centre posts on left in direction of travel, movable across entire length, for lifting roof incl. Expander lifting aid
3 centre posts on right in direction of travel, movable across entire length, for lifting roof incl. Expander lifting aid
3 additional post pockets on both sides
4 rows of slat pockets, 1st pocket row at bottom 460 mm, spacing approx. 160/600/600 mm, with 4 rows of aluminium pointed slats 100/25 mm
Manually operated hydraulic lifting roof, 400 mm elevation, with lever operation on corner posts, for loading and unloading (portal doors must be opened)
Versus sliding cover with plastic brackets, forward-sliding with automatic elevation = pushed together in loading area, with vertical and horizontal guide rollers = smooth operation
Aluminium pallet guide rail profile on both sides for sliding tarpaulins and posts, design height 195 mm
Control rod for sliding tarpaulin (bracket on interior side protection)
Contact your preferred office and we will do our best to solve all your challenges
Get intouch