3-axle low-loader semitrailer with offset platform – reinforced

• Product details

  TYPE DESIGNATION

  3-AXLE LOW LOADER SEMITRAILER – REINFORCED

  WEIGHTS

  Gross train weight (perm.): 40 t
  Gross weight (techn.): 48 t
  Axle assembly load (techn.): 30 t
  Fifth-wheel load (techn.): 18 t – for 3-axle STT
  Tare weight: approx. 9. 1 t

  DIMENSIONS

  Approx. 3,500 mm = front offset platform
  Approx. 7,800 mm = drop-deck platform – flat load surface
  Approx. 1,000 mm = rear access slope
  Total width: approx. 2,550 mm or approx. 3,000 mm with extension
  Platform width: approx. 2,480 mm between side walls on offset platform

  Fifth-wheel height, unladen: approx. 1,2 5 0 mm (= approx. horizontal position of semitrailer)
  Loading height, laden: approx. 920 mm
  Loading height, unladen: approx. 950 mm

  FRAME

  Welded steel construction with tapered frame offset at front
  and drive-on taper at rear
  Replaceable 2″ kingpin (EC installation dimension, width across corners: 2,040 mm)
  2 folding supports at end of frame
  5 pairs of mounting pockets on drop deck incl. tubular posts 100 x 50 x 5 mm,
  useful height approx. 1,000 mm, hot-dip galvanised
  5 pairs of lashing points on external frame
  4 pairs of recessed foldable 5 t lashing rings (10 t techn. tensile strength) on drop deck =
  Arrangement:
  1st pair on the tapered frame offset
  2nd pair after the frame offset
  3rd pair approx. at the height of the 2nd axle in the drop-deck section
  4th pair in front of the rear access slope

  Storage for extension planks below loading platform when not in use.

  CHASSIS

  Air suspension with lifting and lowering device, for loading and unloading
  Automatic adjustment of driving level from 15 km/h

  Air-sprung low-loader unit with low-maintenance axles
  3 x 10 t, wheelbase 2 x 1,310 mm
  S-cam brake 300/200 mm, autom. brake linkage adjuster
  1st and 2nd axles rigid,
  steering knuckle 3rd axle = friction-steered trailing axle (20° steering angle) incl. electropneum. reverse gear interlock with switch operation in cab and additional operation on semitrailer

  Tyres :
  12 x 2 4 5/7 0 R 17.5 14 3 J, manufacturer as per factory specifications
  12 steel wheel rims 6.75 x 17.5, 10-hole, with rim offset, silver

  SUPPORT FIXTURES

  Mechan. 2 x 12 t support jacks, single-sided operation and thrust compensation, manufacturer as per factory specifications

  BRAKE SYSTEM

  Brake system according to EC Directive 71/320 or E CE R13
  Two-line brake, configured for 30 t axle load
  EBS – electronic brake system
  Wabco 2S2M = one axle sensed
  RSS – stability program
  Spring-loaded parking brake
  Steel air tank

  FLOOR

  Softwood floor 50 mm, waterproofed, protruding beyond frame profiles by approx. 5 mm at offset platform and 15 mm on drop deck, or beyond steel stud plate cover over rear wheels

  EXTENSION

  Pull-out extensions, on both sides of drop deck and rear
  taper incl. continuous wooden boarding, extending parts hot-dip galvanised

  RAMPS

  2 foldable, 1-part loading ramps, approx. 2,700/700 mm, with hardwood flooring
  Ramp width manually adjustable by approx. 580 mm, with rod,
  (min. spacing approx. 265 mm up to max. total width of 2,850 mm)
  lockable in driving position using chains with turnbuckle
  Lifting aid with coil spring

  ELECTRICAL EQUIPMENT

  24 V lighting system according to EC Directive 76/756/E WG
  2 five-chamber tail lights on ramps
  LED side marker lights
  1 extendible clearance lamp/marker light on each warning sign for transport of wide loads up to 3 m
  2 x 7-pin sockets at front
  2-pin socket at rear for revolving beacon.

  PAINTWORK

  Blasted with steel granulate, treated with zinc dust primer and spray painted 2-component acrylic paints for commercial vehicles (standard RAL or truck colour)

  Side and rear walls anodised (natural aluminium)
  (for manufacturing reasons, colour deviations are possible in the case of anodised components)
  Plastic and hot-dip galvanised parts unpainted,
  powder-coated attachments/installation parts black

  Reflective contour marking strips across entire length of sides and on the rear (white on sides and red at rear by default), according to ECE 48

  ACCESSORIES

  Rear markings as per ECE standards

  ATTACHMENTS

  Wheel chock(s) as per regulations
  Plastic mudguards or splashguards with spray protection as per regulations
  Spare wheel well for 1 spare wheel
  Side impact protection
  Pull-out/removable warning signs front and rear, incl. position and
  marker lights for wide loads up to 3,000 mm
  Externally welded square ribs on ramps and rear access slope
  Centre of gravity marking

  WALLS/POSTS

  Plug-in side walls on offset platform, 400 mm high, steel front wall,
  25 mm aluminium hollow profile walls at sides and rear, with latch-type tension locks, plug-in rear corner posts in side wall height