3-axle low-loader semitrailer with offset platform – reinforced – extendible

• Product details

  TYPE DESIGNATION

  4-AXLE LOW LOADER SEMITRAILER – REINFORCED – EXTENDIBLE

  WEIGHTS

  Fifth-wheel load: 18,000 kg
  Axle load: 40,000 kg
  Total trailer weight/max. payload: 58,000 kg

  FRAME

  Welded steel construction with tapered frame offset at front
  and drive-on taper at rear

  Drop deck with central frame extendible by approx. 2,000 mm,
  pneum. lockable at following intervals:
  1st position at 600 mm
  2nd position at 1,200 mm
  3rd position at 1,700 mm
  4th position at 2,000 mm
  With operation on trailer (without intermediate support)

  Replaceable 2″ kingpin

  2 folding supports at end of frame
  5 pairs of mounting pockets on drop deck incl. tubular posts 100 x 50 x 5 mm,
  useful height approx. 1,000 mm, hot-dip galvanised

  8 recessed lashing rings (6 on drop deck and 2 in front taper)

  5 pairs of lashing points on external frame

  Rear recess for excavator dipper stick
  (length: approx. 2,600 mm, depth: 250 mm, width: 680 mm)

  CHASSIS

  Air suspension with lifting and lowering device, for loading and unloading

  Air-sprung low-loader unit with low-maintenance axles.
  4 x 10 t at 80 km/h, wheelbase 3 x 1,310 mm.
  S-cam brake 300/200 mm, autom. brake linkage adjuster.
  1st and 2nd axles rigid,
  3rd and 4th axles with steering knuckle = friction-steered trailing axle
  (20° steering angle) incl. electropneum. reverse gear interlock with switch operation
  in cab and additional operation on semitrailer.

  Tyres:
  16 x 235/75 R 17.5 141J, manufacturer as per factory specifications
  16 steel wheel rims 6.75 x 17.5, 10-hole, with rim offset, silver ex-works

  SUPPORT FIXTURES

  Mechan. 24 t support jacks with single-sided operation, low-maintenance

  BRAKE SYSTEM

  Two-line brake, configured for 40 t axle load
  EBS-E – electronic brake system (Wabco 4S3M = 1st + 3rd axles sensed)
  Spring-loaded parking brake on 1st + 2nd axle
  Steel air tank

  FLOOR

  Softwood floor 50 mm, waterproofed, protruding beyond external frame profiles by approx.
  5 mm at offset platform and 15 mm on drop deck, steel stud plate cover
  over rear wheels

  EXTENSION

  Pull-out extensions, on both sides of drop deck and rear
  taper incl. continuous wooden boarding,
  extending parts hot-dip galvanised,
  2 removable warning signs at both front (offset) and rear

  RAMPS

  2 foldable, 2-part loading ramps in special design with rope extension,
  width: 700 mm, length: approx. 2,600 + 1,500 mm,
  with hardwood flooring, for road finisher transport, approx. 10° incline,
  bracket on left ramp for revolving beacon, incl. light

  Ramp width adjustable (with rod),
  lockable in driving position using chains with turnbuckle

  Motor and manually operated hydr. ramp actuators via provided truck connection
  (for 2-pipe truck connection with plug-in coupling NW13, pressure on right in direction of travel, return on left), approx. 1 0 ° incline, with additional hand pump

  ELECTRICAL EQUIPMENT

  Fully compliant with motor vehicle regulations – 24 V
  2 five-chamber tail lights
  2 clearance lamps at front
  2 clearance/contour lights, extendible to 3,000 mm (1 at offset and 1 at rear)
  1 x 2-pin socket at rear with revolving beacon and connecting cable
  for aforementioned light bracket
  Side marker lights
  2 x 7-pin sockets at front

  PAINTWORK

  Blasted with steel granulate, treated with zinc dust primer and spray painted
  2-component acrylic paints for commercial vehicles (standard RAL colour)

  ACCESSORIES

  Rear markings as per ECE standards

  ATTACHMENTS

  4 wheel chocks as per regulations (§70)
  Splashguards with spray protection
  Spare wheel well for 1 spare wheel
  Side impact protection

  WALLS/POSTS

  Plug-in tailboards on offset platform, 400 mm high,
  steel front wall
  25 mm aluminium hollow profile walls at sides and rear,
  plug-in rear corner posts in tailboard height

  BRIDGE PLATFORM

  Approx. 3,500/2,550 mm or approx. 2,480 mm between side walls = front offset platform
  Approx. 7,800/2,550 mm = drop-deck platform – flat load surface
  Approx. 1,000/2,550 mm = rear access slope
  Total width: approx. 2,550 mm or approx. 3,000 mm with extension
  Loading height, laden: approx. 910 mm