3-axle large-scale sliding tarpaulin platform semitrailer – combined transport

• Product details

  TYPE DESIGNATION

  3-AXLE SLIDING TARPAULIN PLATFORM SEMITRAILER RH150 – COMBINED TRANSPORT

  WEIGHTS

  Gross train weight (perm.): 45 t
  Gross weight (techn.): 39 t
  Axle assembly load (techn.): 27 t
  Fifth-wheel load (techn.): 12 t
  Tare weight: approx. 6. 5 t

  DIMENSIONS

  Internal platform length: approx. 13,620 mm
  Internal platform width: approx. 2,480 mm
  Total width: 2,550 mm
  Load space internal height: approx. 2,67 5 mm
  Lateral loading height below guide rail: approx. 2,5 85 mm
  Internal width between guide rails: approx. 2,430 mm
  Portal loading height: approx. 2,5 85 mm
  Portal loading width: approx. 2,480 mm
  Loading height: approx. 150 mm over fifth-wheel height

  Suitable for rail profile P 400 = total height max. 4,000 mm with lowered air suspension
  and fifth-wheel height of 1,130 mm

  FRAME

  Welded steel frame construction, reinforced with 4 grip edges for crane-based rail loading
  Frame for unladen fifth-wheel height of 1,130 – 1,220 mm with air-sprung STT
  Replaceable 2″ kingpin (EC installation dimension,
  width across corners: 2,040 mm)
  Perforated external frame with approx. 100 mm hole spacing, 40/25 mm slot according to DIN EN 12640 and 23 pairs of recessed 2.5 t lashing points

  CHASSIS

  Air suspension with lifting and lowering device (approx. +120/-80 mm), in splitter configuration
  Automatic adjustment of driving level from 15 km/h

  air suspension unit with low-maintenance disc brake axles,
  (ø 370 mm), splitter unit for use in combined transport
  3 x 9 t rigid, wheelbase 1,410 + 1,310 mm (for 27 t rear axle load)

  Tyres:
  6 x 385/65 R 22.5 160J, manufacturer as per factory specifications
  6 steel wheel rims 11.75 x 22.5, 10-hole, 120 mm rim offset, silver

  SUPPORT FIXTURES

  Mechan. 2 x 12 t support jacks, single-sided operation and thrust compensation, manufacturer as per factory specifications

  BRAKE SYSTEM

  Brake system according to EC Directive 71/320 or ECE R13
  Two-line brake
  EBS – electronic brake system
  Wabco 2S2M = one axle sensed
  RSS – stability program
  Spring-loaded parking brake on 2 axles
  Steel air tank

  FLOOR

  Spruce subfloor, 30 mm, lengthwise
  Galvanised steel omega profiles in subfloor
  Secondary floor made from resin-coated birch plywood, 9 mm, flush with external frame
  (floor load capacity: 7 t stacker axle load)

  ELECTRICAL EQUIPMENT

  24 V lighting system according to EC Directive 76/756/EWG
  2 seven-chamber tail lights mounted in light carrier
  LED side marker lights
  2 clearance lamps
  2 contour lights on underride protection
  2 x 7-pin and 1 x 15-pin socket

  PAINTWORK

  Blasted with steel granulate, treated with zinc dust primer and spray painted with 2-component acrylic paints for commercial vehicles (standard RAL or truck colour)

  Plastic and hot-dip galvanised parts unpainted,
  powder-coated attachments/installation parts black

  Reflective contour marking strips across entire length of sides and all-round contour marking at rear (white on sides and red at rear by default), according to ECE 48

  ACCESSORIES

  Rear markings as per ECE standards (horizontal on rear doors/rear wall)
  Assembly of provided codification plates

  ATTACHMENTS

  Rear crash guard with portal post protection and lower post reinforcement
  Wheel chock(s) as per regulations
  1 x retractable step unit at rear right
  Single wheel plastic mudguards with spray protection as per regulations
  Aluminium tarpaulin mounting strips bolted on both sides of external frame
  Tubular underride protection, backward-folding (for rail loading)
  Side impact protection made from aluminium profiles as per regulations, coated black, foldable and height-adjustable (for rail loading)
  1 spare wheel bracket for 1 spare wheel
  1 plastic toolbox, lockable, unpainted
  1 document box on front wall

  SIDE WALLS/SLIDING TARPAULIN

  Fixed aluminium hollow profile front wall, 2,400 mm, with 2 centre supports,
  2 lashing rings inside for load securing
  Closed with tarpaulin over front wall, in same colour as side tarpaulin
  Front wall reinforced inside with galvanised steel plate,
  approx. 650 mm high

  Plastic sliding tarpaulins on both sides with load certification according to Code XL; welded horizontal and vertical strap reinforcements incl. turnbuckles as well as front and rear bolt locks, openable on all 4 corners, with ratchet tensioner at rear
  tarpaulin manufacturer as per factory specifications, tarpaulin colour according to availability
  tarpaulin sealed against external frame,
  Aramid tarpaulin protection (yellow) applied over grip edges
  Aramid-reinforced plastic roof tarpaulin, flame retardant according to “DIN 4102 ÖNORM B1” as per national rail standards, translucent

  Bolted portal at rear with aluminium corner posts, upper crossbeam with forward-sliding cover, incl. fully opening double door in profile design covering entire load space height, each leaf equipped with 2 internal espagnolettes

  POSTS/COVER

  2 fixed aluminium corner posts at front, bolted, protruding from sides
  3 centre posts on left in direction of travel, movable across entire length
  3 centre posts on right in direction of travel, movable across entire length
  4 rows of slat pockets, 1st pocket row at bottom 460 mm, spacing
  approx. 160/450/450 mm, with 4 rows of aluminium pointed
  slats 100/25 mm

  Versus sliding cover with plastic brackets, reinforced cross bows (as per national rail standards), forward-sliding with automatic elevation, limited backward movement (opened from above) = pushed together in loading area, with vertical and horizontal guide rollers = smooth operation
  Aluminium guide rail profile on both sides for sliding tarpaulins and posts, design height 140 mm
  Control rod for sliding tarpaulin (bracket on interior side protection)