3-axle jumbo sliding tarpaulin platform semitrailer

• Product details

  TYPE DESIGNATION

  3-AXLE JUMBO SLIDING TARPAULIN PLATFORM SEMITRAILER RH160

  WEIGHTS

  Gross train weight (perm.): 40 t
  Gross weight (techn.): 39 t
  Axle assembly load (techn.): 27 t
  Fifth-wheel load (techn.): 12 t
  Tare weight: approx. 6. 7 t

  DIMENSIONS

  Internal platform length: approx. 13,620 mm
  (platform length, front: approx. 4,000 mm, rear: approx. 9,620 mm)
  Internal platform width: approx. 2,480 mm
  Total width: 2,550 mm
  Load space internal height: approx. 2,6 5 0 mm, on drop deck:
  approx. 3,0 9 0 mm
  Lateral loading height: approx. 2,550 mm, on drop deck:
  approx. 2,9 9 0 mm
  Rear loading height: approx. 2,9 9 0 mm
  Portal loading width: approx. 2,480 mm
  Loading height, unladen, over centre of unit: approx. 9 2 0 mm or
  approx. 160 mm over fifth-wheel height at front

  FRAME

  Welded steel frame construction
  Sheet metal cover over wheels
  Replaceable 2″ kingpin (EC installation dimension, width across corners: 2,040 mm)
  Perforated external frame with approx. 100 mm hole spacing, 40/25 mm slot according to DIN EN 12640 and 23 pairs of recessed 2.5 t lashing points

  CHASSIS

  Air suspension with lifting and lowering device (approx. +120/-80 mm)
  Automatic adjustment of driving level from 15 km/h

  Air-sprung low-loader unit with low-maintenance axles
  3 x 9 t rigid, wheelbase 2 x 1,310 mm
  S-cam brake 300/200 mm, autom. brake linkage adjuster

  Tyres :
  12 x 235/75 R 17.5 141J, manufacturer as per factory specifications
  12 steel wheel rims, 10-hole, with rim offset, silver

  SUPPORT FIXTURES

  Mechan. 2 x 12 t support jacks, single-sided operation and thrust compensation, manufacturer as per factory specifications

  BRAKE SYSTEM

  Brake system according to EC Directive 71/320 or ECE R13
  Two-line brake
  EBS – electronic brake system
  Wabco 2S2M = one axle sensed
  RSS – stability program
  Spring-loaded parking brake
  Steel air tank

  FLOOR

  Spruce softwood floor, 35 mm, lengthwise with rebate or
  with aluminium omega profiles in drop deck
  Secondary floor made from resin-coated birch plywood, 9 mm, flush with external frame

  ELECTRICAL EQUIPMENT

  24 V lighting system according to EC Directive 76/756/EWG
  2 seven-chamber tail lights in underride protection
  LED side marker lights
  2 clearance lamps
  2 contour lights on underride protection
  2 x 7-pin and 1 x 15-pin sockets

  PAINTWORK

  Blasted with steel granulate, treated with zinc dust primer and spray painted 2-component acrylic paints for commercial vehicles (standard RAL or truck colour)

  Plastic and hot-dip galvanised parts unpainted,
  powder-coated attachments/installation parts black

  Reflective contour marking strips across entire length of sides and all-round contour marking at rear (white on sides and red at rear by default), according to ECE 48

  ACCESSORIES

  Rear markings as per ECE standards (horizontal on rear doors/rear wall)

  ATTACHMENTS

  Rear crash guard and lower post reinforcement
  Wheel chock(s) as per regulations
  1 x retractable step unit at rear right
  Short plastic mudguards with spray protection as per regulations
  Aluminium tarpaulin mounting strips bolted on both sides of external frame
  Aluminium underride protection, coated white
  Side impact protection made from aluminium profiles as per regulations, coated black
  1 spare wheel bracket for 1 spare wheel
  1 plastic toolbox, lockable, unpainted

  SIDE WALLS/SLIDING TARPAULIN

  Fixed aluminium hollow profile front wall, 2,400 mm, with 2 centre supports,
  2 lashing rings inside for load securing
  Closed with tarpaulin over front wall, in same colour as side tarpaulin
  Front wall reinforced inside with galvanised steel plate,
  approx. 650 mm high

  Plastic sliding tarpaulins on both sides with load certification according to Code XL; welded horizontal and vertical strap reinforcements incl. turnbuckles as well as front and rear bolt locks, openable on all 4 corners, with ratchet tensioner at rear,
  tarpaulin sealed against external frame,
  tarpaulin manufacturer as per factory specifications, tarpaulin colour according to availability
  Aramid-reinforced plastic roof tarpaulin, translucent

  Bolted portal at rear with aluminium corner posts, upper crossbeam with forward-sliding cover, incl. fully opening double door in tubular design covering entire load space height, each leaf equipped with 2 internal espagnolettes

  POSTS/COVER

  2 fixed aluminium corner posts at front, bolted, protruding from sides
  3 centre posts on left in direction of travel, movable across entire length
  3 centre posts on right in direction of travel, movable across entire length
  4 or 5 rows of 25 mm slat pockets, 1st pocket row at bottom 460 mm,
  then evenly spaced or adapted with 4 or 5 rows of aluminium slats 100/25 mm

  Versus sliding cover with plastic brackets, forward-sliding with automatic elevation, limited backward movement (opened from above) = pushed together in loading area, with vertical and horizontal guide rollers = smooth operation
  Aluminium guide rail profile on both sides for sliding tarpaulins and posts, design height height 140 mm
  Control rod for sliding tarpaulin (bracket on interior side protection)