3-AXLE ALUMINIUM HOLLOW PROFILE TIPPER SEMITRAILER
For sand, rubble, excavated earth and other bulk materials
Tipper body internal length: approx. 8,500 mm
Tipper body internal width: approx. 2,300 mm
Tipper body internal height: approx. 1,600 mm
= load volume: approx. 31 m³
Total width: 2,550 mm
Loading height, unladen: approx. 375 mm over fifth-wheel coupling
Naxtra welded steel frame construction n weight-optimised lightweight design
Replaceable 2″ kingpin
Air suspension with autom. lowering device via inductive switch and lowering lock via rotary switch on semitrailer
air suspension unit with low-maintenance 430 mm disc brake axles, off-road version,
3 x 9 t, rigid, wheelbase 2 x 1,310 mm
Autom. lifting front axle = raised or lowered according to weight, as well as forced lowering incl. integr. speed-restricted moving-off aid with button operation in cab (no button installation on our part)
Tyres :
6 x 385/65 R 22.5 160J, manufacturer as per factory specifications
6 steel wheel rims 11.75 x 22.5, 10-hole, 120 mm rim offset, silver
2 steel support legs, height-adjustable (only detachable when unladen)
Brake system according to EC Directive 71/320 or EC E R13
Two-line brake
Spring-loaded parking brake on 2 axles
EBS – electronic brake system
Wabco 2S2M = one axle sensed
RSS – stability program
Steel air tank
1 HP front press for rearward tipping, tipping angle approx. 47°
1 pipe system with screw coupling DN20
Aluminium hollow profile body, smooth inside and outside – side and rear walls made from 50/4 mm hollow profiles, with upper stabilising frame,
5 mm front wall with reinforcements,
6 mm floor panels, 8 mm thickness over 2,000 mm length at rear
Angled front and rear walls, in side wall height (flush for roller tarpaulin)
Rear wall = hinged wall with recessed bearing and autom. mech. dual-hook central locking
1 handle
Fixed discharge chute at rear (ground clearance when tipped: approx. 600 mm)
Steel standing platform with aluminium safety grid, with guardrail and step unit
Plastic roller tarpaulin incl. aluminium tube and hand crank, without customs sealing, 3 tension belts on left incl. rubber pads, as well as
turnbuckles on underside of body, horizontal tarpaulin bracket rope fastening, front and rear zig-zag lashing,
tarpaulin manufacturer as per factory specifications, tarpaulin colour according to availability
1 removable transverse support with stop bracket on right for roller tarpaulin
Retainer for rolled up tarpaulin on right in direction of travel
Bracket for hand crank on front wall
24 V lighting system according to EC Directive 76/756/E WG
2 seven-chamber tail lights
LED side marker lights
2 clearance lamps
2 contour lights
2 x 7-pin and 1 x 15-pin socket
Blasted with steel granulate, treated with zinc dust primer and spray painted 2-component acrylic paints for commercial vehicles (standard RAL or truck colour)
unpainted – cleaned = complete body
Plastic and hot-dip galvanised parts unpainted,
powder-coated attachments/installation parts black
Reflective contour marking strips across entire length of sides and all-round contour marking at rear (white on sides and red at rear by default), according to ECE 48
Transporting chemically aggressive bulk goods is not permitted, as this may affect the material properties and the painted surface.
Wheel chock(s) as per regulations
Noise dampers = rubber pads
Foldable aluminium trapezoidal underride protection, unpainted
Single wheel plastic mudguards with spray protection as per regulations
Side impact protection
Gross train weight (perm.): 40 t
Gross weight (techn.): 39 t
Axle assembly load (techn.): 27 t
Fifth-wheel load (techn.): 12 t
Payload: approx. 27 – 28 t
Tare weight: approx. 5.9 t
Rear markings as per ECE standards
Contact your preferred office and we will do our best to solve all your challenges
Get intouch