3-AXLE 3-WAY TIPPER TRAILER – LONG-HAUL TRANSPORT
For pallet and grain transport etc.
Internal length: approx. 8,500 mm
Internal width: approx. 2,460 mm
Total width: 2,550 mm
Loading height, unladen: approx. 1,390 mm
Naxtra welded steel frame construction – low design height
Connector lock for tipper body with cross-over protection
Air suspension with autom. lowering device via inductive switch
Low-maintenance air-sprung axles with 430 mm disc brakes,
each with 9 t axle load
Tyres :
6 x 385/65 R 22.5 160J, manufacturer as per factory specifications
6 steel wheel rims 11.75 x 22.5, 10-hole, 120 mm rim offset, silver
Brake system according to EC Directive 71/320 or ECE R13
Two-line brake
Spring-loaded parking brake on 2nd and 3rd axles
EBS – electronic brake system
Wabco 4S3M = 1st and 3rd axles sensed
RSS – stability program
Steel air tank
1 tipper cylinder for 3-way tipping, approx. 40 t initial lifting force,
1 arrester cable
Rearward tipping angle: approx. 38°
1-pipe system with hydraulic connecting hose incl.
plug-in coupling NW13, without truck attachments
24 V lighting system according to EC Directive 76/756/EWG
2 seven-chamber tail lights
LED side marker lights
2 clearance lamps
2 contour lights
Fixed cable(s) with 2 x 7-pin or 1 x 15-pin connector
Blasted with steel granulate, treated with zinc dust primer and spray painted 2-component acrylic paints for commercial vehicles (standard RAL or truck colour)
Plastic and hot-dip galvanised parts unpainted,
powder-coated attachments/installation parts black
Reflective contour marking strips across entire length of sides and all-round contour marking at rear (white on sides and red at rear by default), according to ECE 48
Wheel chock(s) as per regulations
Noise dampers
Single wheel plastic mudguards with spray protection as per regulations
Side impact protection made from aluminium profiles as per regulations, coated black
Fixed aluminium trapezoidal underride protection, unpainted
1 spare wheel bracket for 1 spare wheel
Tarpaulin hooks on hinges
Gross weight (techn.): 27 t
Gross weight (perm.): 24 t
Payload: approx. 18 t
Tare weight: approx. 5. 8 t
Full-steel welded construction with fine-grained special steel floor panels, 5 mm
(slight floor unevenness possible due to weld distortion)
Grain-tight side wall mounting with labyrinth sealing system
Fixed steel plate front wall, 3 mm, approx. 980 mm high
2-part aluminium hollow profile side walls, 40 mm, approx. 980 mm high, (top and bottom profiles reinforced 4/2 mm, 3 x 200 mm intermediate profiles 2/2 mm), with vertical special sealing groove, without bracket recess, foldable with extended swivel bolt locks and spring lifting aid, hinged with man. central locking (operated separately for each wall)
Aluminium hollow profile rear wall, 40/2/2 mm, approx. 980 mm high,
foldable with extended swivel bolt locks and hinged with man. central locking
Rear markings as per ECE standards
2 fixed front corner posts, integrated in front wall
2 foldable centre posts, in side wall height
2 fixed rear corner posts, welded to sides, in side wall height
Tension chain with fastener for centre posts
Fixed drawbar , 40 mm drawbar eye , with silent bushing and drawbar locking device
Contact your preferred office and we will do our best to solve all your challenges
Get intouch