3-AXLE 3-WAY TIPPER TRAILER – BUILDING SITE
For handling bulk materials such as sand, gravel, rubble, ground excavation etc. on building sites
Internal length: approx. 7,300 mm
Internal width: approx. 2,420 mm
Total width: 2,550 mm
Loading height, unladen: approx. 1,390 mm
Naxtra welded steel frame construction
Connector lock for tipper body with cross-over protection
Air suspension with autom. lowering device via inductive switch
Drum brake axles, S-cam brake 420/180 mm, autom. brake linkage adjuster
each with 9 t axle load
Tyres :
6 x 385/65 R 22.5 160J, manufacturer as per factory specifications
6 steel wheel rims 11.75 x 22.5, 10-hole, 120 mm rim offset, silver
Brake system according to EC Directive 71/320 or ECE R13
Two-line brake
Spring-loaded parking brake on 2nd and 3rd axles
EBS – electronic brake system
Wabco 4S3M = 1st and 3rd axles sensed
RSS – stability program
Steel air tank
1 tipper cylinder for 3-way tipping, approx. 40 t initial lifting force,
1 arrester cable
1-pipe system with hydraulic connecting hose incl.
plug-in coupling NW13, without truck attachments
24 V lighting system according to EC Directive 76/756/EWG
2 seven-chamber tail lights
LED side marker lights
2 clearance lamps
2 contour lights
Fixed cable(s) with 2 x 7-pin or 1 x 15-pin connector
Blasted with steel granulate, treated with zinc dust primer and spray painted 2-component acrylic paints for commercial vehicles (standard RAL or truck colour)
Plastic and hot-dip galvanised parts unpainted,
powder-coated attachments/installation parts black
Reflective contour marking strips across entire length of sides and all-round contour marking at rear (white on sides and red at rear by default), according to ECE 48
Wheel chock(s) as per regulations
Noise dampers
Fixed aluminium trapezoidal underride protection, unpainted
Single wheel plastic mudguards with spray protection as per regulations
1 spare wheel bracket for 1 spare wheel
Side impact protection made from aluminium profiles as per regulations, coated black
Hooks for dosing chains on swivelling rear wall
Gross weight (techn.): 27 t
Gross weight (perm.): 24 t
Payload: approx. 18 t
Tare weight: approx. 5. 7 t
Full-steel welded construction with fine-grained special steel floor panels, 5 mm
(slight floor unevenness possible due to weld distortion)
Fixed steel plate front wall, 3 mm, approx. 900 mm high
2-part reinforced aluminium hollow profile side walls, 60/40 mm, approx. 780 mm high, foldable with extended swivel bolt locks and spring lifting aid, hinged with man. central locking (operated separately for each wall)
Aluminium hollow profile rear wall, 60/40 mm, approx. 780 mm high, foldable with extended locks and hinged with man. central locking
Rear markings as per ECE standards
2 fixed centre posts in side wall height
2 fixed rear corner posts in side wall height, welded to sides
Fixed drawbar , 40 mm drawbar eye , with silent bushing and drawbar locking device
Contact your preferred office and we will do our best to solve all your challenges
Get intouch