2-axle timber/stanchion trailer – without platform

• Product details

  TYPE DESIGNATION

  2-AXLE STANCHION TRAILER – WITHOUT PLATFORM

  WEIGHTS

  Gross weight (techn.): 18 t
  Tare weight: approx. 3.1 t

  DIMENSIONS

  Frame length: approx. 5,200 mm
  Total width: 2,550 mm
  Unladen loading height up to upper stanchion edge: approx. 1,3 5 0 mm

  FRAME

  Naxtra welded steel frame construction – slightly offset at front
  Low-maintenance ball bearing turntable
  gripper deflector plates approx. 200 mm long

  CHASSIS

  Air suspension without lifting and lowering device,
  bellow diameter 360 mm

  Low-maintenance air-sprung axles, each with 9 t axle load
  S-cam brake 420/180 mm, autom. brake linkage adjuster
  Reinforced axle beam (off-road version)

  Tyres:
  4 x 385/65 R 22.5 160J, manufacturer as per factory specifications
  4 steel wheel rims 11.75 x 22.5, 10-hole, without rim offset, silver

  DRAWGEAR

  Fixed drawbar, 40 mm drawbar eye, brought together at the front (Y design) with silent bushing and mechanical fork lock

  BRAKE SYSTEM

  Brake system according to EC Directive 71/320 or ECE R13
  Two-line brake
  EBS
  Wabco 4S3M = both axles sensed
  RSS – stability program
  Spring-loaded parking brake on 2nd axle
  Brake valves etc. mounted with protection or cover

  FLOOR

  Cover between the frame longitudinal beams made from resin-coated panels

  STANCHION BODY

  2 ExTe trailer stanchions 144-S with 2-part stanchions incl. bolt fastening,
  load height: max. 2,800 mm, load capacity of stanchions: max. 7 t per pair (minimal
  stanchion inclination inwards)
  Front stanchion welded to raised frame, protruding approx. 60 mm,
  rear stanchion on lower frame mounted/movable by means of welded clamp fastening, distribution: approx. 1.10 0 mm from front, then approx. 2,700 mm
  1 lashing point for belt hooks per stanchion on left and right

  ELECTRICAL EQUIPMENT

  24 V lighting system according to EC Directive 76/756/EEC
  2 seven-chamber tail lights in underride protection
  LED side marker lights
  2 clearance lamps
  2 contour lights
  Fixed cable(s) with 2 x 7-pin or 1 x 15-pin connector

  PAINTWORK

  Blasted with steel granulate, treated with zinc dust primer and spray painted
  2-component acrylic paints for commercial vehicles (standard RAL or truck colour)

  Stanchions in original orange signal colour
  Plastic and hot-dip galvanised parts unpainted,
  powder-coated attachments/installation parts black

  Reflective contour marking strips across entire length of sides and on the rear (white on sides and red at rear by default), according to ECE 48

  ACCESSORIES

  Rear markings as per ECE standards

  ATTACHMENTS

  Wheel chock(s) as per regulations
  4 single wheel plastic mudguards with spray protection as per regulations (non-removable)
  Aluminium underride protection, coated white
  “Schwarzmüller” rubber apron on the underride protection, over the entire width
  Side impact protection made from aluminium profiles as per regulations, coated black