2-axle sliding tarpaulin platform trailer

• Product details

  TYPE DESIGNATION

  3-AXLE SLIDING TARPAULIN PLATFORM TRAILER

  WEIGHTS

  Gross weight (techn.): 27 t
  Gross weight (perm.): 24 t
  Tare weight: approx. 5. 1 t

  DIMENSIONS

  Internal platform length: approx. 8,500 mm
  Internal platform width: approx. 2,480 mm
  Total width: 2,550 mm
  Load space internal height: approx. 2,680 mm
  Lateral loading height below guide rail: approx. 2,590 mm
  Internal width between guide rails: approx. 2,430 mm
  Portal loading height: approx. 2,590 mm
  Portal loading width: approx. 2,480 mm
  Loading height, unladen approx. 1,280 mm,
  clearance between tyres and frame at front approx. 100 mm
  Frame height at front approx. 105 mm

  FRAME

  Welded steel frame construction
  15 pairs of recessed 2.5 t lashing points according to UVV

  CHASSIS

  Air suspension without lifting and lowering device

  Low-maintenance air-sprung axles with 430 mm disc brakes,
  each with 9 t axle load

  Tyres:
  6 x 385/65 R 22.5 160J, manufacturer as per factory specifications
  6 steel wheel rims 11.75 x 22.5, 10-hole, 120 mm rim offset, silver

  BRAKE SYSTEM

  Brake system according to EC Directive 71/320 or EC E R13
  Two-line brake
  EBS – electronic brake system
  Wabco 4S3M = 1st and 3rd axles sensed
  RSS – stability program
  Spring-loaded parking brake on 2nd and 3rd axles
  Steel air tank

  FLOOR

  Spruce subfloor, 30 mm, lengthwise
  Galvanised steel omega profiles in subfloor
  Secondary floor made from resin-coated birch plywood, 9 mm, flush with external frame
  (floor load capacity: 5,460 kg stacker axle load acc. to CSC)

  ELECTRICAL EQUIPMENT

  24 V lighting system according to EC Directive 76/756/E WG
  2 seven-chamber tail lights in underride protection
  LED side marker lights
  2 clearance lamps
  2 contour lights on underride protection
  Fixed cable(s) with 2 x 7-pin or 1 x 15-pin connector.

  PAINTWORK

  Blasted with steel granulate, treated with zinc dust primer and spray painted 2-component acrylic paints for commercial vehicles (standard RAL or truck colour)

  Plastic and hot-dip galvanised parts unpainted,
  powder-coated attachments/installation parts black

  Reflective contour marking strips across entire length of sides and all-round contour marking at rear (white on sides and red at rear by default), according to ECE 48

  ACCESSORIES

  Rear markings as per ECE standards

  ATTACHMENTS

  Rear crash guard with portal post protection and lower post reinforcement
  Wheel chock(s) as per regulations
  1 x retractable step unit at rear right
  Single wheel plastic mudguards with spray protection as per regulations
  Aluminium combination bumper strip, bolted on both sides, for tarpaulin mounting and slat fixation
  Aluminium underride protection, coated white
  Side impact protection made from aluminium profiles as per regulations, coated black
  1 spare wheel bracket for 1 spare wheel (on right, approx. mid-trailer)

  SIDE WALLS/SLIDING TARPAULIN

  Fixed aluminium hollow profile front wall, 2,400 mm, with 2 centre supports,
  2 lashing rings inside for load securing
  Closed with tarpaulin over front wall, in same colour as side tarpaulin
  Front wall reinforced inside with 3/5 mm aluminium chequer plate, approx. 650 mm high

  Plastic sliding tarpaulins on both sides with load certification according to Code XL; welded horizontal and vertical strap reinforcements incl. turnbuckles as well as front and rear bolt locks, openable on all 4 corners, with ratchet tensioner at front and rear,
  tarpaulin manufacturer as per factory specifications, tarpaulin colour according to availability
  Plastic tarpaulin roof, translucent = white
  Without Carnet customs seal and without tarpaulin rope/brackets for load space closure

  Bolted portal at rear with aluminium corner posts, upper crossbeam with forward-sliding Edscha cover, incl. fully opening double door in tubular design covering entire load space height, each leaf equipped with 2 internal espagnolettes

  POSTS/COVER

  2 fixed aluminium corner posts at front, bolted, protruding approx. 95 mm from sides
  2 centre posts on left in direction of travel, movable across entire length
  2 centre posts on right in direction of travel, movable across entire length
  4 rows of slat pockets, 1st pocket row at bottom 460 mm,
  spacing approx. 160/450/450 mm, with 4 rows of aluminium slats 100/25 mm

  Edscha sliding cover frame with plastic brackets, forward-sliding with automatic elevation, limited backward movement (opened from above) = pushed together in loading area, with vertical and horizontal guide rollers = smooth operation
  Aluminium guide rail profile on both sides for sliding tarpaulins and posts,
  design height 125 mm, or approx. 140 mm with plastic sealing lip bent upwards

  DRAWGEAR

  Fixed drawbar, 2,100 mm long , 40 mm drawbar eye (spacing approx. 1,650 mm – for truck superstructure approx. 350 mm) with silent bushing