2-AXLE SLIDING TARPAULIN PLATFORM TRAILER
Gross weight (techn.): 18 t
Tare weight: approx. 3.9 t
Internal platform length: approx. 7,300 mm
Internal platform width: approx. 2,480 mm
Total width: 2,550 mm
Load space internal height: approx. 2,680 mm
Lateral loading height below guide rail: approx. 2,590 mm
Internal width between guide rails: approx. 2,430 mm
Portal loading height: approx. 2,590 mm
Portal loading width: approx. 2,480 mm
Loading height, unladen approx. 1,280 mm,
clearance between tyres and frame at front approx. 100 mm
Frame height at front approx. 105 mm
Welded steel frame construction
15 pairs of recessed 2.5 t lashing points according to UVV
Air suspension without lifting and lowering device
Low-maintenance air-sprung axles with 430 mm disc brakes,
each with 9 t axle load
Tyres:
4 x 385/65 R 22.5 160J, manufacturer as per factory specifications
4 steel wheel rims 11.75 x 22.5, 10-hole, 120 mm rim offset, silver
Brake system according to EC Directive 71/320 or E CE R13
Two-line brake
EBS – electronic brake system
Wabco 4S3M = both axles sensed
RSS – stability program
Spring-loaded parking brake on 2nd axle
Steel air tank
Spruce subfloor, 30 mm, lengthwise
Galvanised steel omega profiles in subfloor
Secondary floor made from resin-coated birch plywood, 9 mm, flush with external frame
(floor load capacity: 5,460 kg stacker axle load acc. to CSC)
24 V lighting system according to EC Directive 76/756/E WG
2 seven-chamber tail lights in underride protection
LED side marker lights
2 clearance lamps
2 contour lights on underride protection
Fixed cable(s) with 2 x 7-pin or 1 x 15-pin connector
Blasted with steel granulate, treated with zinc dust primer and spray painted 2-component acrylic paints for commercial vehicles (standard RAL or truck colour)
Plastic and hot-dip galvanised parts unpainted,
powder-coated attachments/installation parts black
Reflective contour marking strips across entire length of sides and all-round contour marking at rear (white on sides and red at rear by default), according to ECE 48
Rear markings as per ECE standards
Rear crash guard with portal post protection and lower post reinforcement
Wheel chock(s) as per regulations
1 x retractable step unit at rear right
Single wheel plastic mudguards with spray protection as per regulations
Aluminium combination bumper strip, bolted on both sides, for tarpaulin mounting and slat fixation
Aluminium underride protection, coated white
Side impact protection made from aluminium profiles as per regulations, coated black
1 spare wheel bracket for 1 spare wheel (on right, approx. mid-trailer)
Fixed aluminium hollow profile front wall, 2,400 mm, with 2 centre supports,
2 lashing rings inside for load securing
Closed with tarpaulin over front wall, in same colour as side tarpaulin
Front wall reinforced inside with 3/5 mm aluminium chequer plate, approx. 650 mm high
Plastic sliding tarpaulins on both sides with load certification according to Code XL; welded horizontal and vertical strap reinforcements incl. turnbuckles as well as front and rear bolt locks, openable on all 4 corners, with ratchet tensioner at front and rear,
tarpaulin manufacturer as per factory specifications, tarpaulin colour according to availability
Plastic tarpaulin roof, translucent = white
Bolted portal at rear with aluminium corner posts, upper crossbeam with forward-sliding Edscha cover, incl. fully opening double door in tubular design covering entire load space height, each leaf equipped with 2 internal espagnolettes
2 fixed aluminium corner posts at front, bolted, protruding
approx. 95 mm from sides
1 centre post on left in direction of travel, movable across entire length
1 centre post on right in direction of travel, movable across entire length
4 rows of slat pockets, 1st pocket row at bottom 460 mm,
spacing approx. 160/450/450 mm, with 4 rows of aluminium slats 100/25 mm
Edscha sliding cover frame with plastic brackets, forward-sliding with automatic elevation, limited backward movement (opened from above) = pushed together in loading area, with vertical and horizontal guide rollers = smooth operation
Aluminium guide rail profile on both sides for sliding tarpaulins and posts, design height 125 mm, or approx. 140 mm with plastic sealing lip bent upwards
Fixed drawbar, 2,200 mm long , 40 mm drawbar eye (spacing approx. 1,650 mm – for truck superstructure approx. 300 mm) with silent bushing
Contact your preferred office and we will do our best to solve all your challenges
Get intouch