5-AXLE LOW LOADER TRAILER
Approx. 2,800/2,550 mm = raised platform at front incl. frame offset
Approx. 5,800 or 6,400/2,550 mm = drop-deck platform – flat load surface or external surfaces advanced
Approx. 800/2,550 mm = rear access slope
Total width: approx. 2,550 mm or approx. 3,000 mm with extension
Loading height, laden: approx. 920 mm
Welded steel construction with flat front frame offset or body offset
and drive-on taper at rear with externally welded square ribs
4 pairs of mounting pockets for 100 x 50 mm tubular steel posts in external frame
Recess in access slope for excavator shovel linkage
5 pairs of lashing points in external frame
2 pairs of recessed lashing rings in floor
Lubrication strip for front axles and turntable at front
Lubrication strip for rear axles and ramp at rear
Air suspension with lifting and lowering device on rear axles (for loading and unloading)
Automatic adjustment of driving level from 15 km/h
Low-loader axles, each with 11 t axle load at 80 km/h
S-cam brake 300/200 mm, autom. brake linkage adjuster
1st to 4th axle rigid
Steering knuckle 5th axle = friction-steered trailing axle
(12° steering angle) incl. electropneum. reverse gear interlock with switch operation in cab and additional operation on chassis
Autom. lifting 3rd axle = raised or lowered autom. according to weight (with the lifting axle raised, the loading height or total height increases by approx. 50 mm) and forced lowering for autom. lifting axle with button operation in cab
Tyres :
20 x 245/70 R 17.5 143J, manufacturer as per factory specifications
20 steel wheel rims 6.75 x 17.5, 10-hole, with rim offset, silver ex-works
Brake system according to EC Directive 71/320 or ECE R13
Two-line brake
EBS – electronic brake system (Wabco 4S3M)
Spring-loaded parking brake
Steel air tank
Spruce wood floor 50 mm, waterproofed, protruding approx. 5 – 10 mm beyond frame profiles or beyond steel stud plate cover over rear wheels
Pull-out extensions, on both sides of drop deck and rear taper,
incl. continuous wooden boarding = when used without extensions
(however, track width of construction machines/vehicles to be transported must not exceed the external frame width of 2,550 mm)
Brackets for floor boards on side or in excavator shovel recess
2 removable warning signs at both front and rear
2 foldable, 1-part loading ramps, approx. 2,700/710 mm, with hardwood flooring
Ramp width manually adjustable by approx. 550 mm, with rod,
(min. spacing approx. 295 mm up to max. total width of 2,815 mm)
lockable in driving position using chains with turnbuckle
2 autom. folding supports at rear
Lifting aid with coil spring
24 V lighting system according to EC Directive 76/756/EWG
2 five-chamber tail lights on ramps
LED side marker lights
2 position or contour lights in each case, extendible to 3,000 mm
Fixed cable(s) with 2 x 7-pin or 1 x 15-pin connector
Bracket incl. revolving beacon on left ramp, with connecting cable and switch on end plate
Blasted with steel granulate, treated with zinc dust primer and spray painted 2-component acrylic paints for commercial vehicles
Plastic and hot-dip galvanised parts (extensions etc.) unpainted,
powder-coated attachments/installation parts and drawbar black
Rear markings as per ECE standards
Side impact protection
4 wheel chocks as per regulations
Plastic mudguards or splashguards with spray protection as per regulations
Spare wheel well for 1 spare wheel
2 open accessory compartments in raised platform at front
Externally welded square ribs on ramps and rear access slope
Centre of gravity marking
Reflective contour marking strips across entire length of sides and on the rear (white on sides and red at rear by default), according to ECE 48
Fixed drawbar, 50 mm heavy-duty drawbar eye,
with silent bushing
Contact your preferred office and we will do our best to solve all your challenges
Get intouch