2-axle jumbo sliding tarpaulin platform trailer

• Product details

  TYPE DESIGNATION

  2-AXLE PLATFORM TRAILER – BUILDING MATERIALS

  WEIGHTS

  Gross weight (techn.): 18 t
  Tare weight: approx. 3. 6 t

  DIMENSIONS

  Internal platform length: approx. 7,100 mm
  Internal platform width: approx. 2,480 mm
  Total width: 2,550 mm
  Loading height, unladen approx. 1, 35 0 mm,
  clearance between tyres and frame at front approx. 13 0 mm
  Frame height at front approx. 1 60 mm

  FRAME

  Welded steel frame construction, reinforced for 14 t point load
  over 3 m at centre of mass
  15 pairs of recessed lashing points according to UVV

  CHASSIS

  Air suspension without lifting and lowering device

  Low-maintenance air-sprung axles with 430 mm disc brakes,
  each with 9 t axle load

  Tyres:
  4 x 385/65 R 22.5 160J, manufacturer as per factory specifications
  4 steel wheel rims 11.75 x 22.5, 10-hole, 120 mm rim offset, silver

  BRAKE SYSTEM

  Brake system according to EC Directive 71/320 or ECE R13
  Two-line brake
  EBS – electronic brake system
  Wabco 4S3M = both axles sensed
  RSS – stability program
  Spring-loaded parking brake on 2nd axle
  Steel air tank

  FLOOR

  Spruce subfloor, 30 mm, lengthwise
  Galvanised steel omega profiles in subfloor
  Secondary floor made from resin-coated birch plywood, 9 mm, flush with external frame
  (floor load capacity: 5,460 kg stacker axle load acc. to CSC)

  SIDE WALLS

  Fixed aluminium hollow profile front wall, 1,200 mm, with 2 full-height centre supports
  Front wall reinforced inside with 3/5 mm aluminium chequer plate, approx. 650 mm high

  2-part aluminium hollow profile side walls, 1,000/25 mm, with vertical and horizontal rubber seal and internally riveted frame, with Kinnegrip double locking
  Foldable aluminium hollow profile rear wall, 1,000 mm high, with vertical and horizontal rubber seal and internally riveted frame, with Kinnegrip double locking
  2 folding steps

  ELECTRICAL EQUIPMENT

  24 V lighting system according to EC Directive 76/756/EWG
  2 seven-chamber tail lights in underride protection
  LED side marker lights
  2 clearance lamps
  2 contour lights on underride protection
  Fixed cable(s) with 2 x 7-pin or 1 x 15-pin connector

  PAINTWORK

  Blasted with steel granulate, treated with zinc dust primer and spray painted 2-component acrylic paints for commercial vehicles (standard RAL or truck colour)

  Plastic and hot-dip galvanised parts unpainted,
  powder-coated attachments/installation parts black

  Reflective contour marking strips across entire length of sides and all-round contour marking at rear (white on sides and red at rear by default), according to ECE 48

  ACCESSORIES

  Rear markings as per ECE standards

  ATTACHMENTS

  Rear crash guard
  Side wall stop buffer
  Wheel chock(s) as per regulations
  Single wheel plastic mudguards with spray protection as per regulations
  Aluminium underride protection, coated white
  Side impact protection made from aluminium profiles as per regulations, coated black
  1 spare wheel bracket for 1 spare wheel
  Peg for tarpaulin below external frame

  POSTS

  Integrated extended lever locks, Kinnegrip system
  2 front corner posts, bolted to front, in front wall height
  2 Kinnegrip centre posts, foldable and removable, in side wall height
  2 rear Kinnegrip corner posts, foldable and removable, side-mounted, in side wall height

  DRAWGEAR

  Fixed drawbar, 2,000 mm long , 40 mm drawbar eye (spacing approx. 1,750 mm – for truck superstructure approx. 0 mm) with silent bushing