2-axle 3-way tipper trailer – long-haul transport

• Product details

  TYPE DESIGNATION

  2-AXLE 3-WAY TIPPER TRAILER – LONG-HAUL TRANSPORT
  For pallet and grain transport etc.

  DIMENSIONS

  Internal length: approx. 7,300 mm
  Internal width: approx. 2,460 mm
  Total width: 2,550 mm
  Loading height, unladen: approx. 1,390 mm

  FRAME

  Naxtra welded steel frame construction – low design height
  Connector lock for tipper body with cross-over protection

  CHASSIS

  Air suspension with autom. lowering device via inductive switch

  Low-maintenance air-sprung axles with 430 mm disc brakes,
  each with 9 t axle load

  Tyres :
  4 x 385/65 R 22.5 160J, manufacturer as per factory specifications
  4 steel wheel rims 11.75 x 22.5, 10-hole, 120 mm rim offset, silver

  BRAKE SYSTEM

  Brake system according to EC Directive 71/320 or ECE R13
  Two-line brake
  Spring-loaded parking brake on 2nd axle
  EBS – electronic brake system
  Wabco 4S3M = both axles sensed
  RSS – stability program
  Steel air tank

  TIPPING SYSTEM

  1 tipper cylinder for 3-way tipping, approx. 30 t initial lifting force,
  1 arrester cable
  Rearward tipping angle: approx. 38°
  1-pipe system with hydraulic connecting hose incl.
  plug-in coupling NW13, without truck attachments

  ELECTRICAL EQUIPMENT

  24 V lighting system according to EC Directive 76/756/EWG
  2 seven-chamber tail lights
  LED side marker lights
  2 clearance lamps
  2 contour lights
  Fixed cable(s) with 2 x 7-pin or 1 x 15-pin connector

  PAINTWORK

  Blasted with steel granulate, treated with zinc dust primer and spray painted 2-component acrylic paints for commercial vehicles (standard RAL or truck colour)

  Plastic and hot-dip galvanised parts unpainted,
  powder-coated attachments/installation parts black

  Reflective contour marking strips across entire length of sides and all-round contour marking at rear (white on sides and red at rear by default), according to ECE 48

  ATTACHMENTS

  Wheel chock(s) as per regulations
  Noise dampers
  Single wheel plastic mudguards with spray protection as per regulations
  Fixed aluminium trapezoidal underride protection, unpainted
  1 spare wheel bracket for 1 spare wheel
  Side impact protection made from aluminium profiles as per regulations, coated black
  Tarpaulin hooks on hinges

  WEIGHTS

  Gross weight (techn.): 18 t
  Payload: approx. 13-14 t
  Tare weight: approx. 4. 7 t

  TIPPING LOADING RAMP

  Full-steel welded construction with fine-grained special steel floor panels, 5 mm
  (slight floor unevenness possible due to weld distortion)

  SIDE WALLS

  Grain-tight side wall mounting with labyrinth sealing system
  Fixed steel plate front wall, 3 mm, approx. 980 mm high
  2-part aluminium hollow profile side walls, 40 mm, approx. 980 mm high, (top and bottom profiles reinforced 4/2 mm, 3 x 200 mm intermediate profiles 2/2 mm), with vertical special sealing groove, without bracket recess, foldable with extended swivel bolt locks and spring lifting aid, hinged with man. central locking (operated separately for each wall)
  Aluminium hollow profile rear wall, 40/2/2 mm, approx. 980 mm high,
  foldable with extended swivel bolt locks and hinged with man. central locking

  ACCESSORIES

  Rear markings as per ECE standards

  POSTS

  2 fixed front corner posts, integrated in front wall
  2 foldable centre posts, in side wall height
  2 fixed rear corner posts, welded to sides, in side wall height
  Tension chain with fastener for centre posts

  DRAWGEAR

  Fixed drawbar , 40 mm drawbar eye , with silent bushing and drawbar locking device