2-axle 3-way tipper trailer – building site

• Product details

  TYPE DESIGNATION

  2-AXLE 3-WAY TIPPER TRAILER – BUILDING SITE
  For handling bulk materials such as sand, gravel, rubble, ground excavation etc. on building sites

  DIMENSIONS

  Internal length: approx. 5,100 mm
  Internal width: approx. 2,420 mm
  Total width: 2,550 mm
  Loading height, unladen: approx. 1,450 mm

  FRAME

  Naxtra welded steel frame construction
  Connector lock for tipper body with cross-over protection

  CHASSIS

  Air suspension with autom. lowering device via inductive switch

  Drum brake axles, S-cam brake 420/180 mm, autom. brake linkage adjuster
  each with 9 t axle load

  Tyres :
  4 x 385/65 R 22.5 160J, manufacturer as per factory specifications
  4 steel wheel rims 11.75 x 22.5, 10-hole, without rim offset , silver

  BRAKE SYSTEM

  Brake system according to EC Directive 71/320 or ECE R13
  Two-line brake
  Spring-loaded parking brake on 2nd axle
  EBS – electronic brake system
  Wabco 4S3M = both axles sensed
  RSS – stability program
  Steel air tank

  TIPPING SYSTEM

  1 tipper cylinder for 3-way tipping, approx. 30 t initial lifting force,
  1 arrester cable
  1-pipe system with hydraulic connecting hose incl.
  plug-in coupling NW13, without truck attachments

  ELECTRICAL EQUIPMENT

  24 V lighting system according to EC Directive 76/756/EWG
  2 seven-chamber tail lights
  LED side marker lights
  2 clearance lamps
  2 contour lights
  Fixed cable(s) with 2 x 7-pin or 1 x 15-pin connector

  PAINTWORK

  Blasted with steel granulate, treated with zinc dust primer and spray painted with 2-component acrylic paints for commercial vehicles (standard RAL or truck colour)

  Plastic and hot-dip galvanised parts unpainted,
  powder-coated attachments/installation parts black

  Reflective contour marking strips across entire length of sides and all-round contour marking at rear (white on sides and red at rear by default), according to ECE 48

  ATTACHMENTS

  Wheel chock(s) as per regulations
  Noise dampers
  Fixed aluminium trapezoidal underride protection, unpainted
  Single wheel plastic mudguards with spray protection as per regulations
  1 spare wheel bracket for 1 spare wheel
  Side impact protection made from aluminium profiles as per regulations, coated black
  Hooks for dosing chains on swivelling rear wall

  WEIGHTS

  Gross weight (techn.): 18 t
  Payload: approx. 13 – 14 t
  Tare weight: approx. 4. 3 t

  TIPPING LOADING RAMP

  Full-steel welded construction with fine-grained special steel floor panels, 5 mm
  (slight floor unevenness possible due to weld distortion)

  SIDE WALLS

  Fixed steel plate front wall, 4 mm, approx. 980 mm high
  1-part reinforced aluminium hollow profile side walls, 60/40 mm, approx. 880 mm high, foldable with extended swivel bolt locks and spring lifting aid, hinged with man. central locking
  4 mm steel sheet rear wall, approx. 980 mm high, hinged with raised bearing and autom. pneumatic locking

  ACCESSORIES

  Rear markings as per ECE standards

  POSTS

  2 fixed rear corner posts, raised, side-mounted

  DRAWGEAR

  Fixed drawbar , 40 mm drawbar eye , with silent bushing and drawbar locking device