2-axle 3-way tipper trailer – building materials

• Product details

  TYPE DESIGNATION

  2-AXLE 3-WAY TIPPER TRAILER – BUILDING MATERIALS
  For lightweight materials and pallets in the building materials trade

  DIMENSIONS

  Internal length: approx. 6,600 mm
  Internal width: approx. 2,460 mm
  Total width: 2,550 mm
  Loading height, unladen: approx. 1,390 mm

  FRAME

  Naxtra welded steel frame construction
  Connector lock for tipper body with cross-over protection

  CHASSIS

  Air suspension with autom. lowering device via inductive switch

  Drum brake axles, S-cam brake 420/180 mm, autom. brake linkage adjuster
  each with 9 t axle load

  Tyres :
  4 x 385/65 R 22.5 160J, manufacturer as per factory specifications
  4 steel wheel rims 11.75 x 22.5, 10-hole, without rim offset , silver

  BRAKE SYSTEM

  Brake system according to EC Directive 71/320 or ECE R13
  Two-line brake
  1 spring-loaded parking brake on 2nd axle
  EBS – electronic brake system
  Wabco 4S3M = both axles sensed
  RSS – stability program
  Steel air tank

  TIPPING SYSTEM

  1 tipper cylinder for 3-way tipping, approx. 30 t initial lifting force,
  1 arrester cable
  1-pipe system with hydraulic connecting hose incl.
  plug-in coupling NW13, without truck attachments

  ELECTRICAL EQUIPMENT

  24 V lighting system according to EC Directive 76/756/EWG
  2 seven-chamber tail lights
  LED side marker lights
  2 clearance lamps
  2 contour lights
  Fixed cable(s) with 2 x 7-pin or 1 x 15-pin connector

  PAINTWORK

  Blasted with steel granulate, treated with zinc dust primer and spray painted 2-component acrylic paints for commercial vehicles (standard RAL or truck colour)

  Plastic and hot-dip galvanised parts unpainted,
  powder-coated attachments/installation parts black

  Reflective contour marking strips across entire length of sides and all-round contour marking at rear (white on sides and red at rear by default), according to ECE 48

  ATTACHMENTS

  Wheel chock(s) as per regulations
  Noise dampers
  Fixed aluminium trapezoidal underride protection, unpainted
  Single wheel plastic mudguards with spray protection as per regulations
  Side impact protection made from aluminium profiles as per regulations, coated black
  1 spare wheel bracket for 1 spare wheel

  WEIGHTS

  Gross weight (techn.): 18 t
  Payload: approx. 13 t
  Tare weight: approx. 4. 6 t

  TIPPING LOADING RAMP

  Full-steel welded construction with fine-grained special steel floor panels, 5 mm
  (slight floor unevenness possible due to weld distortion)

  SIDE WALLS

  Fixed steel plate front wall, 3 mm, approx. 900 mm high
  2-part reinforced aluminium hollow profile side walls, 40/4/2 mm, approx. 780 mm high, foldable with extended swivel bolt locks and spring lifting aid, hinged with man. central locking (operated separately for each wall)
  Aluminium hollow profile rear wall, 40/4/2 mm, approx. 780 mm high, foldable with extended locks and hinged with man. central locking

  ACCESSORIES

  Rear markings as per ECE standards

  POSTS

  2 foldable/removable centre posts in side wall height with tension chain
  2 fixed rear corner posts in side wall height, welded to sides

  DRAWGEAR

  Fixed drawbar , 40 mm drawbar eye , with silent bushing and drawbar locking device